Abstract
Structure of material removing mechanism was improved for the defects of original aluminum foil separator. In this structure transformation, the original cylinder drive is replaced by cam mechanism, forming a new type of material removing mechanism. In the Pro/e environment, surrounding and columniform cam of material removing mechanism conducted parametric design. In Mechanism module, through the motion simulation and measurement verification of material removing mechanism, the relative position of the two cams can be adjusted, ultimately reducing the design cycle and providing a reference for the structure optimization in the later period.
Publication Date
2-28-2015
First Page
107
Last Page
110
DOI
10.13652/j.issn.1003-5788.2015.01.025
Recommended Citation
Yahong, ZHENG; Jiqiang, LI; Xuechang, ZHANG; and Zhongjie, SUN
(2015)
"Improvement and simulation on material removing mechanism of aluminum foil separator,"
Food and Machinery: Vol. 31:
Iss.
1, Article 25.
DOI: 10.13652/j.issn.1003-5788.2015.01.025
Available at:
https://www.ifoodmm.cn/journal/vol31/iss1/25
References
[1] 葛正浩,杨芙莲. Pro/engineer wildfire 4.0 机构运动学与动力学仿真及分析［M］.北京:化学工业出版社,2009.
[2] 吕长生,姜大成.基于Pro/E的圆柱凸轮机构设计与运动仿真［J］.设计与制造,2009(3):96～98.
[3] 二代龙震工作室.Pro/Mechanism Wildfire 3.0/4.0机构/运动分析［M］.北京:电子工业出版社,2008.
[4] 张策.机械原理和机械设计［M］.北京:机械工业出版社,2004.
[5] 闻邦椿.机械设计手册［M］.北京:机械工业出版社,2010.
[6] Sun Jianping,Tang Zhaoping. The parametric design and motion analysis about line translating tip follower cam mechanism based on model datum graph［J］.Procedia Engineering, 2011(12):439～444.
[7] 张继春,王剑峰.圆柱凸轮机构的参数化造型和运动仿真［J］.科学技术与工程,2006,6(9):1 213～1 215.
[8] Zhang Youhu,Xia Qiuhua.Conical cam mechanism parametric design and movement simulation based on Pro/E［J］.Journal of Mechanical Transmission,2011,35(1):31～33.
[9] 陈建刚.端面凸轮参数化建模与仿真加工［J］.陕西理工学院学报(自然科学版),2011,27(4):7～10.
[10] Fu Yan-ming.Analysis and design of the globoidal indexing cam mechanism［J］. Journal of Shanghai University,2000,4(1):54～59.
[11] 侯卫平,钟苏丽.基于UG NX的变螺距螺旋面风道的设计［J］.食品与机械, 2011,27(4):104～105.