Abstract
The thin-film dryer process calculation mathematical model was established, with 25% calcium propionate as the research object, using the numerical simulation software MATLAB, drying rate and drying length was obtained and the influence of feed temperature, rotate speed, feed rate, and heating temperature was also discussed. The results showed that feed rate and heating temperature had a great influence on drying rate and drying length, while feed temperature and rotate speed had less influence on drying rate and drying length, which provided the basis for calcium propionate drying.
Publication Date
6-28-2015
First Page
97
Last Page
101
DOI
10.13652/j.issn.1003-5788.2015.03.023
Recommended Citation
Guangyu, CHEN; Qingsheng, LI; and Naiyu, LI
(2015)
"Analysis on drying performance of calcium propionate in thin-film dryer,"
Food and Machinery: Vol. 31:
Iss.
3, Article 23.
DOI: 10.13652/j.issn.1003-5788.2015.03.023
Available at:
https://www.ifoodmm.cn/journal/vol31/iss3/23
References
[1] 马四朋,杨卓如,涂伟萍,等.搅拌薄膜蒸发器的蒸发机理及强化研究进展［J］.化学工业与工程，2002(2):185～190.
[2] 皮丕辉,杨卓如,马四朋.刮膜薄膜蒸发器的特点和应用［J］.现代化工, 2001(3):41～44.
[3] McKenna T F. Design model of a wiped film evaporator. Applications to the devolatilisation of polymer melts［J］. Chemical Engineering Science, 1995, 50(3):453～467.
[4] Sanjay B P, Raosaheb P,Mujumdar A S, et al. Mathematical modeling of agitated thin-film dryer［J］. Drying Technology, 2011, 29(6):719～728.
[5] 王作云. 薄膜干燥器在高锰酸钠生产改造中应用［J］. 浙江化工, 1992(2):44～47.
[6] 《化学工程手册》编辑委员会.化学工程手册（第九篇：蒸发与结晶）［M］ .北京：化学工业出版社，1985.
[7] Sanjay B P,Mujumdar A S, Throat B N. Flow pattern and heat transfer in agitated thin film dryer［J］. Chemical Engineering & Processing Process Intensification, 2011, 50(7):687～693.
[8] 贺小华,唐平,李佳,等. 薄膜蒸发器内流体动特性的数值模拟［J］.过程工程学报,2005,5(4):156～163.
[9] 朱永峰,李庆生,柳杰，等.LD苹果酸降膜蒸发器内流体的传热性能模拟［J］.食品与机械,2013,29(3):173～176.