Analysis on mechanical properties of green walnut based on Workbench

Authors

ZHENG Jiahong, College of Mechanical and Electrical Engineering, Shaanxi University of Science & Technology, Xian, Shaanxi 710021, China
WU Dongze, College of Mechanical and Electrical Engineering, Shaanxi University of Science & Technology, Xian, Shaanxi 710021, China
LIANG Jinsheng, College of Mechanical and Electrical Engineering, Shaanxi University of Science & Technology, Xian, Shaanxi 710021, China
NIU Shuoya, College of Mechanical and Electrical Engineering, Shaanxi University of Science & Technology, Xian, Shaanxi 710021, China

Abstract

According to the characteristics of the stress in the process of the peeling of walnut, analyzed the static characteristics of the walnut and create a geometrical model of the green walnut. By the pressure text of the green walnut under different loading direction, simulated the mechanical characteristics at the same time by using workbench. Then, by comparing the pressure test and the simulation results, two results were obtained, which proves the feasibility of the simulation analysis. In addition, the establishment of mechanical model can be also used to analyze the walnut green damage theory during the peeling process, which provided reference for the development of new green walnut peel equipment. Pressure test and finite element simulation results showed that under the conditions applied to the same pressure, force direction was not decisive factor to remove the peel.

Publication Date

10-28-2015

First Page

86

Last Page

88,131

DOI

10.13652/j.issn.1003-5788.2015.05.021

Recommended Citation

Jiahong, ZHENG; Dongze, WU; Jinsheng, LIANG; and Shuoya, NIU (2015) "Analysis on mechanical properties of green walnut based on Workbench," Food and Machinery: Vol. 31: Iss. 5, Article 21.
DOI: 10.13652/j.issn.1003-5788.2015.05.021
Available at: https://www.ifoodmm.cn/journal/vol31/iss5/21

References

[1] 高海生, 朱凤妹, 李润丰. 我国核桃加工产业的生产现状与发展趋势[J]. 经济林研究, 2008（3）: 119～126.
[2] 杨忠强, 李忠新, 杨莉玲, 等. 核桃脱青皮技术及其装备研究[J]. 食品与机械, 2013, 29（6）: 121～124，142.
[3] 吴子岳. 绵核桃剥壳机的研究设计[J]. 食品与机械, 1995（3）: 22～24.
[4] 陈勤, 陶夏平. 葆春精胶囊补肾壮阳的实验研究[J]. 安徽大学学报(自然科学版), 2004（3）: 65～69.
[5] 赵海峰, 李学敏, 肖荣. 核桃提取物对改善小鼠学习和记忆作用的实验研究[J]. 山西医科大学学报,2004（1）:20～22.
[6] 李忠新, 杨莉玲, 阿布力孜·巴斯提, 等. 中国核桃产业发展研究[J]. 中国农机化学报, 2013（4）: 23～28.
[7] 王维, 刘东琴, 王亚妮, 等. 一种实用型青核桃去皮机的设计与试验[J]. 包装与食品机械, 2014（3）: 14～16.
[8] 帕合尔鼎, 杨莉玲, 杨忠强, 等. 6TXH-600型青核桃脱皮清洗机的研制[J]. 新疆农机化, 2010（5）: 11～12.
[9] 石鑫. 青核桃脱皮、清洗机的设计及试验研究[D]. 乌鲁木齐: 新疆农业大学, 2010.
[10] 王宏虬, 缪福俊, 李彪, 等. 核桃青皮提取物对马铃薯蚜虫与瓢虫的杀虫活性[J]. 江苏农业科学, 2012（7）: 112～114.
[11] 白欣欣, 刘继展, 李萍萍. 有限元法在农业物料力学研究中的应用进展[J]. 农机化研究, 2013（2）: 5～8,13.
[12] 夏恒, 徐凌. 西瓜成熟度建模与动力有限元分析及其模态试验[J]. 江苏理工大学学报, 1998（2）: 82～87.
[13] 王芳, 王春光, 杨晓清. 西瓜的力学特性及其有限元分析[J]. 农业工程学报, 2008（11）: 118～121.
[14] 刘慧. 核桃品种介绍与评述[J]. 西北园艺(果树), 2012（1）: 34～36.
[15] 吴德光, 蒋小明. 农产品压缩试验研究及其应用(Ⅰ)——压缩试验方法[J]. 云南农业大学学报, 1990（3）: 171～176.
[16] Jamal Nourain, 应义斌, 王剑平, 等. 西瓜的有限元模型及其应用(英文)[J]. 农业工程学报, 2005（1）: 17～22.
[17] 王荣, 焦群英, 魏德强, 等. 葡萄的力学特性及有限元模拟[J]. 农业工程学报, 2005（2）: 7～10.
[18] 谢丽娟, 宗力. 莲子受力有限元分析[J]. 农业机械学报, 2006（6）: 94～97.
[19] 丁欣硕, 凌桂龙. ANSYS Workbench有限元分析案列详解[M]. 北京: 清华大学出版社, 2014.