Design of starter-making process control system using bidirectional variable frequency vibration pressing

Authors

LI Hong, Mechanical and Electronic Engineering Department, Jiangsu Food & Pharmaceutical Science College, Huaian, Jiangsu 223005, China
WANG Wenle, Mechanical and Electronic Engineering Department, Jiangsu Food & Pharmaceutical Science College, Huaian, Jiangsu 223005, China
HUA Yong, Mechanical and Electronic Engineering Department, Jiangsu Food & Pharmaceutical Science College, Huaian, Jiangsu 223005, China

Abstract

Based on the condition of lower mud extracting ability of starter making, developed a starter making method of rotary bidirectional variable frequency vibration pressing which is designed on Programmable Logic Controller(PLC), and the hardware and software design of PLC field controlling as well as host control system was achieved. The results showed that starter produced by this method had the advantage of density uniformity, good porosity, modest hardness, easy demoulding, smooth surface, exterior condition and full degree surface, and it also has an ideal effect on mud extracting.

Publication Date

10-28-2015

First Page

117

Last Page

120,145

DOI

10.13652/j.issn.1003-5788.2015.05.030

Recommended Citation

Hong, LI; Wenle, WANG; and Yong, HUA (2015) "Design of starter-making process control system using bidirectional variable frequency vibration pressing," Food and Machinery: Vol. 31: Iss. 5, Article 30.
DOI: 10.13652/j.issn.1003-5788.2015.05.030
Available at: https://www.ifoodmm.cn/journal/vol31/iss5/30

References

[1] 付捷, 王瑛. 我国酒厂制曲压块机的现状与发展方向［J］. 包装与食品机械, 2005, 23(5): 29～30．
[2] 陈贵林. 探索茅台酒制曲自动化实现途径［J］. 酿酒科技, 2011(4): 65～66．
[3] 张静. 多点采压压曲机设计及其关键结构件仿真研究［D］. 山西: 太原理工大学, 2009.
[4] 任飞, 张晓宇. 浓香型大曲糖化动力学研究［J］. 食品与机械, 2013, 29(1): 42～44．
[5] 李宏. 双向变频振压制曲试验分析［J］.食品与机械, 2014, 30(4): 224～226, 270．
[6] 李宏, 赵刚, 花勇, 等. 回转式变频振压制曲机：中国, CN103865716B［P］. 2015—04—22.