A 3D-print pen based on principles of Pistons continuous working

Authors

WANG Jinlei, College of Mechanical and Energy Engineering, Ningbo Institute of Technology, Zhejiang University, Ningbo, Zhejiang 315100, China; College of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China
WANG Xiaojun, College of Mechanical and Energy Engineering, Ningbo Institute of Technology, Zhejiang University, Ningbo, Zhejiang 315100, China; Zhejiang Provincial Key Laboratory of Part Rolling Technology, Ningbo, Zhejiang 315100, China
REN Yantao, College of Mechanical and Energy Engineering, Ningbo Institute of Technology, Zhejiang University, Ningbo, Zhejiang 315100, China; College of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China

Abstract

Introduced the structural characteristics of a 3D-print pen based on the principles of Pistons continuous working ,and then established the mathematical model of the system. Compared with the other 3D-print pen, its print materials changed into liquid material ,such as liquid chocolate, from ABS plastic. The 3D-print pen had the advantages of reasonable design, convenient operation, and extended print material range. These were benefit for development and design of the other 3D-print pen.

Publication Date

10-28-2015

First Page

136

Last Page

138

DOI

10.13652/j.issn.1003-5788.2015.05.035

Recommended Citation

Jinlei, WANG; Xiaojun, WANG; and Yantao, REN (2015) "A 3D-print pen based on principles of Pistons continuous working," Food and Machinery: Vol. 31: Iss. 5, Article 35.
DOI: 10.13652/j.issn.1003-5788.2015.05.035
Available at: https://www.ifoodmm.cn/journal/vol31/iss5/35

References

[1] 姜斐祚,魏新龙,姜效臣.3D打印笔:中国,201310266463［P］.2013—10—09.
[2] 荷兰发明3D食品“打印机”据预存造型喷射食材［J］.食品与机械,2012,28(6):102.
[3] 胡亮,易秀明,徐国荣,等.双缸往复式活塞泵设计及试验研究［J］.机床与液压,2013,41(16):85~88.
[4] 韩桂华.液压系统设计技巧与禁忌［M］.北京:化学工业出版社,2011.
[5] 江晓明,董世钢.液压与气压传动［M］.武汉:华中科技大学出版社,2013.
[6] 查鑫宇,毕新胜, 王玉刚,等.复合式液压缸的设计与研究［J］.液压与气动,2013(12):68~71.
[7] 陈振堂,李昕涛.空心液压缸同步系统的设计建模及仿真［J］.液压气动与密封,2013(12):68~69.
[8] 白晓丽,伍毅.面向制造和装配的食品机械设计［J］.食品与机械,2012,28(1):146~147.
[9] 上官红喜.液压驱动面条挤压机的设计［J］.食品与机械,2014,30(1):123~126.
[10] 成大先.机械设计手册.单行本.减（变）速器·电机与电器［M］.北京:化学工业出版社,2004.
[11] 杨建国,张兆营,鞠晓丽,等.工程流体力学［M］.北京:北京大学出版社,2010.
[12] 高钦和,马长林.液压系统动态特性建模仿真技术及应用［M］.北京:电子工业出版社,2013.