Abstract
High-efficient dynamic transmission and high-precision static weighing were combined to develop a bulk food weighing and sorting system with high efficiency and precision. The conveyor belt was used to complete the uninterrupted transmission of the material in this system. Before weighing, the materials were arranged in rows successively, followed by a intermittent static weighing of the materials using a plurality of static weighing sensors, and then they felt to a classified packaging in turn. Combinating the static weighing and dynamic transmission, the high efficiency and precision bulk food weighing were undertaken, with the grading weight could be adjusted according to the actual needs of the system. Moreover, it could execute weighing 150 times per minute with the accuracy up to 0.1%, and the weighing error of high precision standard was only 0.002 kg. The above control system combined man-machine interface (HMI) with PLC combined control mode, and this was easy to operate and monitor remotely with strong reliability and high visualization.
Publication Date
10-28-2016
First Page
89
Last Page
93
DOI
10.13652/j.issn.1003-5788.2016.10.021
Recommended Citation
Qiaosheng, HAN; Jinshi, LU; Xueheng, TAO; Xuejun, WANG; and Chao, JIANG
(2016)
"Efficient high-precision dynamic and static combination of bulk food weighing sorting system,"
Food and Machinery: Vol. 32:
Iss.
10, Article 20.
DOI: 10.13652/j.issn.1003-5788.2016.10.021
Available at:
https://www.ifoodmm.cn/journal/vol32/iss10/20
References
[1] 毛建东. 动态称重系统的级建模及神经网络辨识[J]. 食品与机械, 2009, 25(1): 112-116.
[2] 李光乐. FFS包装机伺服电子定量秤研究[J]. 食品与机械, 2013, 29(4): 118-121.
[3] 贾丽娜, 张辉, 陈文庆. 颗粒状物料自动称量机研究[J]. 机电工程, 2012, 29(1): 46-48.
[4] 胡立志, 胡赤兵, 吴坡, 等. 基于PLC的自动称重系统[J]. 新技术新工艺, 2009, 12(2): 61-70.
[5] 李永伟, 朱婧菲, 刘占阳, 等. 连续输送物料计量称重系统的设计[J]. 河北科技大学学报, 2013(2): 1 008-1 542.
[6] 曾繁玲. 基于施耐德Twido PLC的自动称重包装机的控制[J]. 制造业自动化, 2012, 34(5): 147-158.
[7] 裴学胜, 程超然. 工业设计在食品机械中的应用[J]. 食品工业, 2015(4): 34-51.
[8] 马永微. 基于绿色理念的食品机械设计研究[J]. 山东工业技术, 2015, 7(2): 55-57.
[9] 宋芳, 孙全颖, 陈涛, 等. PLC与电子称之间的通讯技术研究[J]. 哈尔滨理工大学学报, 2004(1): 13-20.
[10] YIN Y, WANG S R, WANG C C, et al. Driving-mode test of dual-mass MEMS gyroscope[J]. Opt. Precision Eng., 2009, 17(6): 1 355-1 360.
[11] 黄晓杰, 孟鑫, 刘崑. 食品机械设备课程教学模式的探究与实践[J]. 农业科技与装备, 2015(2): 133-136.
[12] 牛犇. 探究面向制造和装配的食品机械设计[J]. 科技资讯, 2014(7): 78-82.
[13] 龚林生. 绿色理念在机械设计制造中的应用[J]. 科技创新与应用, 2014(6: 73.
[14] MURAKOSHI T, YASUO E, FUKATSU K, et al. Electrostatically levitatedring shaped rotationalgyro/accelerometer[J]. Japanese Journal of Applied Physics, 2003, 42(4B): 2 468-2 470.
[15] SUNG W T, SUNG S K, LEE J Y, et al. Development of a lateral velocity-controlled MEMS vibratory gyroscope and its performance test[J]. Journal of Micromechanics and Microengineering, 2008, 18(2): 1-13.
[16] HOULIHAN R, KRAFT M. Modelling squeeze film effects in MEMS accelerometer with a levitated proofmass[J]. Journal of Micromech Microeng, 2005, 15(3): 893-902.