Abstract
In order to understand the effect of cigarette quality on the different application amount in different grades of cigarette lap adhesive, six gradient sizing of three different cigarette lap adhesive glue quantity have been tested in the same condition. The results showed that：1）the different cigarette lap adhesive glue quantity was influential of the sensory quality of cigarette, when the amount of the sizing agent was more than 1.5 mL per thousand cigarette, the cigarette sensory quality became worse with the increase of the amount of the glue, mainly manifested in the cigarette sensory stimulation increases, the miscellaneous gas and dry sense increases, the clean degree becomes bad. 2) Effect of the amount of glue on the appearance quality of cigarette, when the sizing value of 1# was 2.0 mL per thousand cigarette, the phenomenon of explosion occurs, when the glue amount was 3.5 mL per thousand cigarette, there was the phenomenon of inner overflow; when the sizing value of 2# and 3# was 1.0 mL per thousand cigarette, the phenomenon of explosion occurs, when the glue amount was 3.5 mL per thousand cigarette, there was the phenomenon of inner overflow. 3) Combined with the evaluation results of the quality of cigarettes inside and outside, it was determined that the amount of the 1# adhesive was 2.5-3.0 mL per thousand cigarette, and 2# or 3# was 1.5 to 2.0 mL per thousand cigarette. Fourth, with the change of cigarette lap adhesive glue quantity, physical quality, chemical components of mainstream smoke of cigarette and seven kinds of harmful ingredients were not obvious.
Publication Date
10-28-2016
First Page
183
Last Page
188
DOI
10.13652/j.issn.1003-5788.2016.10.042
Recommended Citation
Liang, GU; Haimin, GAO; Wenbo, LIU; Meizhou, DING; Weimin, SONG; and Anyan, XIONG
(2016)
"Effect of different cigarette lap adhesive glue quantity on cigarette quality,"
Food and Machinery: Vol. 32:
Iss.
10, Article 41.
DOI: 10.13652/j.issn.1003-5788.2016.10.042
Available at:
https://www.ifoodmm.cn/journal/vol32/iss10/41
References
[1] 尹俊林, 牟定荣, 温光和, 等. 卷烟搭口胶现状和发展[J]. 中国胶粘剂, 2015, 14(10): 43-46.
[2] 温光和, 沈靖轩, 马涛, 等. 新型搭口胶的制备及其对卷烟品质的影响[J]. 应用化工, 2010, 39(11): 1 722-1 725.
[3] 张献伟, 周梁, 蒋爱民, 等. 食品胶特性及其在食品中应用[J]. 食品与机械, 2016, 32(2): 81-83.
[4] 鲁才略. 卷烟搭口上胶装置: 中国, 200820082431.7[P]. 2008-11-19.
[5] 王爱成. 一种卷烟机供胶装置: 中国, 201120539349.4[P]. 2012-09-05.
[6] 熊安言, 孙九喆, 苏东赢, 等. ZJ17卷烟机卷烟纸施胶系统的改进[J]. 食品与机械, 2016, 32(2): 81-83.
[7] 熊安言, 郜海民, 张爱忠, 等. 不同搭口胶施胶量对卷烟质量的影响[J]. 科技通报, 2015, 31(9): 120-122, 126.
[8] 国家烟草专卖局. 卷烟工艺规范[S]. 北京: 中央文献出版社, 2003: 62-82.
[9] 国家烟草专卖局. 卷烟工艺测试与分析大纲[S]. 成都: 四川大学出版社, 2004: 20-65.
[10] 欧阳文, 李佛琳, 赵屹峰. 卷烟工艺与评吸[M]. 成都: 西南财经大学出版社, 2007: 5-35.
[11] 张献伟, 周梁, 蒋爱民, 等. 食品胶特性及其在食品中应用[J]. 食品与机械, 2011, 27(1): 166-169.
[12] 杨宝武. 卷烟胶的特性与应用[J]. 烟草科技, 1999(5): 4-8.
[13] 舒芳誉, 罗靖, 马明旻. 基于多变异分析的烟支物理质量影响因素研究[J]. 烟草科技, 2015, 48(12）: 72-77, 86.