Abstract
VERICUT is one kind of 3D software, which can not only carry on the virtual machining, but also optimize the cutting tool. The VERICUT processing simulation and tool path were optimized for trademark logo mold parts with inspection procedure process, and may produce collision and cut, improve tool route, reduce unneces-sary tool time. The processing simulation and the optimization of the process were showed in VERICUT environment.
Publication Date
11-28-2016
First Page
85
Last Page
89
DOI
10.13652/j.issn.1003-5788.2016.11.019
Recommended Citation
Yi, DENG; Ke, DING; Hong, FU; and Guijun, MA
(2016)
"Optimization on NC machining simulation and machining processing route based on VERICUT,"
Food and Machinery: Vol. 32:
Iss.
11, Article 19.
DOI: 10.13652/j.issn.1003-5788.2016.11.019
Available at:
https://www.ifoodmm.cn/journal/vol32/iss11/19
References
[1] 郑峰, 葛春荣, 周德钊, 等. 汽轮机叶片数控编程及加工过程全景仿真与优化[J]. 组合机床与自动化加工技术, 2013(6): 122-123.
[2] 陈常标, 王保民, 孙柯, 等. 基于UG和VERICUT数控加工与仿真研究[J]. 机械工程师, 2014(11): 174-176.
[3] RUAN Xiao-guang, ZHAO Rong-rong, CAI An-jiang, et al. Research and application of cutting efficiency optimization based on VERICUT and UG[J]. Applied Mechanics and Materials, 2014, 635-637: 612-615.
[4] 周矿兵. 浅析数控加工中切削用量的合理选择[J]. 甘肃冶金, 2011, 33(1): 113-114.
[5] 郑贞平, 黄云林, 陈思涛. VERICUT7.3数控仿真技术与实例详解[M]. 北京: 机械工业出版社, 2015.
[6] 邓集松. 基于VERICUT数控加工仿真与优化的研究与应用[J]. 机械工程师, 2009(2): 125-126.
[7] 丁科, 邓奕. 基于VERICUT的虚拟机床建模及应用[J]. 湖南工程学院学报, 2016(2): 36-39.