The effects of operating parameters of cigarette making machine on cigarette yield

Authors

YAO Ermin, College of Food and Bioeng, Zhengzhou Univ. of Light Ind., Zhengzhou, Henan 450000, China
SHAO Ning, College of Food and Bioeng, Zhengzhou Univ. of Light Ind., Zhengzhou, Henan 450000, China
LI Xiao, College of Food and Bioeng, Zhengzhou Univ. of Light Ind., Zhengzhou, Henan 450000, China
JIANG Xuebing, College of Food and Bioeng, Zhengzhou Univ. of Light Ind., Zhengzhou, Henan 450000, China
ZHANG Mingya, Guizhou Tobacco Industry Co., Ltd. Guiyang Cigarette Factory, Guiyang, Guizhou 550001, China
XU Xiufeng, Guizhou Tobacco Industry Co., Ltd. Guiyang Cigarette Factory, Guiyang, Guizhou 550001, China

Abstract

The effects of cigarette machine operating parameters were studied on the yield of different grades of cigarettes. The effects of operating parameters, such as the amount of running silk, yarn feeding and yarn supply and the volume of ticking, on the yield of cigarettes A, B and C were studied by uniform design method. The results were as follows. ① The polynomial models of the running parameters and yield of different grades cigarettes were established. for A grades, it was Y_A=27.500+0.704X₂+1.72E-03X^2.08₁-2.110E-03X₁X₃; for B grades, it was Y_B= 98.250 +8.29E-03X₃-1.170E-03X₂X₄; and for C grades, it was Y_C=72.991+1.262X₄+7.550E-05X₂X₃. R² were 0.990, 0.994, and 0.999 respectively, and they showed good descriptions of the relationship between the operating parameters and the yield. ② Optimization of operating parameters was found to be increasing the total amount of wire and adjusting appropriately the secondary air damper opening. It was confirmed by practical producing that the optimized yield was enhanced, and the yield was increased by 2.6%. Finally, a certain optimization effect on improving the yield was obtained.

Publication Date

12-28-2016

First Page

206

Last Page

208

DOI

10.13652/j.issn.1003-5788.2016.12.044

Recommended Citation

Ermin, YAO; Ning, SHAO; Xiao, LI; Xuebing, JIANG; Mingya, ZHANG; and Xiufeng, XU (2016) "The effects of operating parameters of cigarette making machine on cigarette yield," Food and Machinery: Vol. 32: Iss. 12, Article 44.
DOI: 10.13652/j.issn.1003-5788.2016.12.044
Available at: https://www.ifoodmm.cn/journal/vol32/iss12/44

References

[1] 菅威, 谢道良, 宋金华. 优化梗丝生产过程参数降低烟叶消耗[J]. 安徽农学通报, 2012, 18(4): 100-102.
[2] 张勇, 王良勇, 崔玲玲. 制丝线生产设备节能运行模式的优化设计[J]. 烟草科技, 2016(3): 105-109.
[3] 罗登山, 姚光明, 刘朝贤. 中式卷烟加工工艺技术探讨[J]. 烟草科技, 2005(5): 4-8.
[4] 韦小玲, 康金岭. 管板式烘丝机工艺参数对卷烟香气的影响[J]. 食品与机械, 2012, 28(6): 193-196.
[5] 王晓燕, 郑利锋, 吴金凤, 等. 不同卷烟机卷制对配方烟丝结构与卷制质量的影响[J]. 轻工科技, 2012, 9(9): 126-127.
[6] 沈宁, 赵娟, 于静洋, 等. 基于PLSR分析常规化学成分对市售卷烟感官品质的影响[J]. 食品与机械, 2015, 31(6): 47-52.
[7] 倪克平, 范铁桢, 王涛. 卷烟硬度、吸阻与单支重相关性分析[J]. 烟草科技, 2002(3): 9-13.
[8] 李丹, 李焕威, 赵瑞峰, 等. 干燥方式对上部烟叶感官质量的影响[J]. 食品与机械, 2016, 32(9): 192-195.
[9] 孙东亮, 米强, 胡建军. 卷烟卷制质量的稳定性研究[J]. 烟草科技, 2007(4): 9-12.
[10] 国家烟草专卖局. 卷烟工艺测试与分析大纲[S]. 成都: 四川大学出版社, 2004: 254-256.