Abstract
In order to solving the problem of feeding machine barrel steam heating, the material liquid temperature control precision and anxious burnt phenomenon, using hot water instead of steam of the material liquid to increase temperature compensation control, the barrel structure is improved, heat exchange area is increased, and the liquid temperature rise time has been shorten. The results show that: the liquid temperature has been controlled in the range from 40 to 50 ℃(control accuracy ±2 ℃), and the liquid to be heated up to the set temperature reduces the time that is spent more than 30%.
Publication Date
2-28-2016
First Page
79
Last Page
80,83
DOI
10.13652/j.issn.1003-5788.2016.02.020
Recommended Citation
Weimin, SONG; Xiaoguang, XU; Chunguang, LI; Anyan, XIONG; and Mi, SUN
(2016)
"Improved design and engineering application of feeding material liquid temperature control system,"
Food and Machinery: Vol. 32:
Iss.
2, Article 20.
DOI: 10.13652/j.issn.1003-5788.2016.02.020
Available at:
https://www.ifoodmm.cn/journal/vol32/iss2/20
References
[1] 郑飞, 李媛, 刘德强, 等. 基于图像处理的烟片加料均匀性评价方法[J]. 烟草科技, 2015, 48(11): 65-68.
[2] 胡建军, 周冀衡, 熊燕, 等. 基于稳健性设计的筛分加料工序质量评价和参数优化[J]. 中国烟草学报, 2006, 12(5): 25-29.
[3] 王兵, 姚光明. 卷烟叶丝加料工艺[M]. 郑州: 河南科学技术出版社, 2013: 13-24.
[4] 李向东. 制丝工艺加料均匀性分析[J]. 烟草科学研究, 2003(4): 38-40.
[5] 马骥. 功能性香精添加前后烟丝挥发性成分变化及对感官品质的影响[J]. 郑州轻工业学院学报: 自然科学版, 2012, 27(2): 31-36.
[6] 韩慧, 倪荣军, 孙计赞. 基于PLC食品检测实验室自动加液装置的设计与实现[J]. 食品与机械, 2014, 30(1): 130-132.
[7] 郭庆堂, 吴进发. 实用制冷工程设计手册[M]. 北京: 中国建设工业出版社, 1994: 8-10.