Abstract
Based on the previous research of small batch of grain drying process, exchange the batch type recirculating grain dryer tube for heat exchanger with plate heat exchanger, with easier access to 100 DEG C high temperature steam instead of 800 DEG C flue gas, at the same time, plate heat exchanger can also adopt a more efficient material. Finally, using the matlab optimization toolbox for plate heat exchanger model optimization, under the guarantee for thermal efficiency unchanged, the size of the heat exchanger was optimized. Research has shown that after improvement is higher than before the heat exchanger in heat efficiency, and reduces heat exchanger area and the waste materials.
Publication Date
5-28-2016
First Page
98
Last Page
100,193
DOI
10.13652/j.issn.1003-5788.2016.05.023
Recommended Citation
Yu, ZHANG and Jiefei, XIE
(2016)
"Optimization design of heat exchanger for plate type heat exchanger,"
Food and Machinery: Vol. 32:
Iss.
5, Article 23.
DOI: 10.13652/j.issn.1003-5788.2016.05.023
Available at:
https://www.ifoodmm.cn/journal/vol32/iss5/23
References
[1] 陈楠, 贺小华, 邵虎跃, 等. 换热器管板有限元分析模型研究[J]. 食品与机械, 2012, 28(2): 90-93.
[2] 冯骉, 徐涵庆, 顾瑾. 一种新型换热器——板壳式换热器[J]. 食品与机械, 1997(4): 35-36.
[3] 李健民, 李长友, 徐凤英, 等. 批式循环粮食干燥机换热器的三维流场模拟——基于Solidworks[J]. 农机化研究, 2013(1): 18-21.
[4] 马云霞. 列管式换热器的设计与计算[J]. 粮食流通技术, 2005(2): 18-19.
[5] 赵晓文, 苏俊林. 板式换热器的研究现状及进展[J]. 冶金能源, 2011(1): 52-55.
[6] 刘红, 杨哲人, 蒋兰芳, 等. 基于CFD的U型管换热器温度降模型[J]. 食品与机械, 2015, 31(2): 152-156.
[7] 杨世文, 徐小健. MATLAB优化工具箱在结构优化设计中的应用[J]. 科学技术与工程, 2008, 8(5): 1 347-1 349.
[8] Woon S F, Rehbock V, Loxton R. Global optimization method for continuous-times sensor scheduling[J]. Nonlinear Dynamics and Systems Theory, 2010, 10(2): 175-188.
[9] Chai Q Q, Loxton R, Teo K L, et al. A class of optimal state-delay control problems[J]. Nonliners Analysis: Real World Application, 2013, 14: 1 536-1 550.
[10] 褚洪生, 杜增吉, 阎金华, 等. MATLAB7.2优化设计实例指导教程[M]. 北京: 机械工业出版社, 2007: 198-204.
[11] 段明序. 混合动力客车机械式自动变速器参数优化设计方法研究[D]. 长春: 吉林大学, 2013: 11-15.
[12] 吴银亮, 陈林, 郭礼波. 基于非线性Fmincon法的抗滑桩优化设计[J]. 铁道建筑, 2011(5): 81-84.