Abstract
In order to investigate the effects of online laser perforation parameters on physical and chemical indexes of fine cigarette, the cigarette samples were prepared with different laser perforation positions, different hole numbers and different laser perforation time, and the relationships of the said parameters were also analyzed with cigarette ventilation rate,the consistence of ventilation rate and the deliveries of routine smoke constituents. The results showed that: ① Compared with normal cigarettes, the positions of online laser pulse had little influence on physical and chemical indexes of fine cigarette, the change of physical and chemical indexes of fine cigarettes with different positions was smaller, while the ventilation rate was the highest in the middle of the filter (14 mm from the lip end), and the minimum amount of mainstream smoke was released. ② Laser pulse hole number and time could affect physical and chemical indexes of fine cigarettes obviously, the mean value of ventilation rate increased with the increase of hole number and laser pulse time, meanwhile, the amount of mainstream smoke emission decreased significantly. The suitable ventilation rate and smoke index could be obtained by adjusting the parameters of online laser perforation of fine cigarette.
Publication Date
11-28-2017
First Page
200
Last Page
203
DOI
10.13652/j.issn.1003-5788.2017.11.041
Recommended Citation
Mingqi, GAO; Liang, GU; Mingzhe, LI; Ping, LU; Peng, JI; Xiaomin, FENG; Ning, WANG; Yang, MENG; Haiying, TIAN; Chun, CUI; and Shaodong, HU
(2017)
"Effects of online laser perforation parameters on physical and chemical indexes of fine cigarettes,"
Food and Machinery: Vol. 33:
Iss.
11, Article 41.
DOI: 10.13652/j.issn.1003-5788.2017.11.041
Available at:
https://www.ifoodmm.cn/journal/vol33/iss11/41
References
[1] 张宇. 聊聊细支烟[J]. 新烟草, 2014(11): 6-7.
[2] 君宇. 细支烟的新概念[J]. 中国烟草, 2014(5): 15-16.
[3] 梁建, 苏健凌. 烟支在线激光打孔技术降焦分析[J]. 广西轻工业, 2008(8): 48-49.
[4] 陈慧斌. 接装纸打孔对卷烟质量的影响研究[C]// 中国烟草学会工业专业委员会. 中国烟草学会工业专业委员会烟草工艺学术研讨会论文集. 北京: 中国烟草学会工业专业委员会, 2010: 7.
[5] 冯文, 廖臻, 徐世涛, 等. 接装纸激光、静电打孔方式对卷烟烟气影响的对比研究[J]. 云南大学学报: 自然科学版, 2010, 32(S1): 115-117, 123.
[6] 曹伏军, 解晓翠, 汪旭, 等. 在线激光打孔参数对卷烟通风率及常规烟气成分释放量的影响[J]. 烟草科技, 2014(11): 45-49, 61.
[7] 解晓翠. 在线激光打孔卷烟通风率与卷烟理化指标的关系[J]. 郑州轻工业学院学报: 自然科学版, 2015, 30(Z1): 52-56.
[8] 魏玉玲. 卷烟材料组合搭配对主流烟气量及过滤效率的影响[J]. 烟草科技, 2008(11): 9-13.
[9] 于川芳, 罗登山, 王芳, 等. 卷烟“三纸一棒”对烟气特征及感官质量的影响(一)[J]. 中国烟草学报, 2001(2): 1-7.
[10] 于川芳, 罗登山, 王芳, 等. 卷烟“三纸一棒”对烟气特征及感官质量的影响(二)[J]. 中国烟草学报, 2001(3): 6-10.
[11] 金勇, 王诗太, 李克, 等. 接装纸打孔参数对卷烟烟气焦油及7种有害成分释放量影响的PLS回归分析[J]. 烟草科技, 2016, 49(4): 37-44.
[12] 谷春亮. ZJ17生产预打孔卷烟通风率影响因素研究[J]. 机械工程师, 2014(10): 257-259.
[13] 莫远烈, 代建文. LASER 300S在线激光打孔参数的选择[J]. 烟草科技, 2006(10): 10-15.
[14] 郭丽, 栗志, 王彬. 水松纸透气度检测技术[J]. 中华纸业, 2003(6): 46-48.
[15] 熊安言, 李善莲, 丁美宙, 等. 卷烟生产过程质量稳定性评价方法的设计及应用[J]. 食品与机械, 2017, 33(2): 183-188.
[16] DAVIS D L, NIELSEN M T. 烟草——生产, 化学和技术[M]. 国家烟草专卖局科技教育司, 中国烟草科技信息中心, 译. 北京: 化学工业出版社, 2003: 20-30.