Abstract
Based on the phenomenon that the change of flow state caused by the wall roughness, in order to research the effect of micro structure on the surface of the inner wall of the high pressure homogenization cavity in the high pressure homogenizer to homogenization performance, the groove micro structure is structured on the inner of smooth homogenization cavity, and a computer fluid dynamics (CFD) technique is used to model the two-phase flow in a high pressure homogenizer. This paper will study the high pressure homogenization cavity in the APV-high pressure homogenizer, the oil-water emulsion as the homogeneous materials, the smooth homogeneous cavity and the rectangular section groove homogeneous cavity and the triangular section groove homogeneous cavity are simulated and calculated respectively, and the results are compared. The results show that the homogeneous cavity with groove which has a smaller particle size than the smooth homogeneous cavity after homogenization, the rectangular section groove homogeneous cavity has a smaller particle size than the triangular section groove homogeneous cavity after homogenization, at the same time the particle size distribution is more uniform, improved the homogeneous performance. The results of computer simulation to the results trend obtained by the theoretical analysis of the turbulent near-wall region shows very good agreement.
Publication Date
2-28-2017
First Page
73
Last Page
76,105
DOI
10.13652/j.issn.1003-5788.2017.02.016
Recommended Citation
Shu, DONG; Yanbin, SHI; and Xueqing, RONG
(2017)
"Simulation analysis of the effecton homogeneous performance from micro structure of homogeneous cavity inner wall,"
Food and Machinery: Vol. 33:
Iss.
2, Article 16.
DOI: 10.13652/j.issn.1003-5788.2017.02.016
Available at:
https://www.ifoodmm.cn/journal/vol33/iss2/16
References
［1］ 雒亚洲, 鲁永强, 王文磊. 高压均质机的原理及应用［J］. 中国乳品工业, 2007(10): 55-58.
［2］ 刘斌, 吴雪, 冯涛, 等. 均质阀结构分析［J］. 食品与机械, 2014, 30(1): 104-106.
［3］ LEV A R. Analysis and calculation of the efficiency of a homogenizing valve［J］. Journal of Food Engineering, 1994, 23(4): 429-448.
［4］ Fluent Inc. Fluent user’s guide［M/CD］. Lebanon: Fluent Inc, 2003: 47-53.
［5］ TGUNNAR J, FARAZ M, JONATHAN W N. Some Problems with Near-Wall Measurements and the Determination of Wall Shear Stress［J］. Journal of Innovation Economics, 2006, 2(2): 3-13.
［6］ 刘骁飞, 韦安阳, 罗坤, 等. 粗糙壁面上湍流边界层的直接数值模拟［J］. 工程热物理学报, 2014, 35(12): 2 425-2 428.
［7］ KIRAN B, JOHN K, GARY C. Effect of Roughness on Wall-Bounded Turbulence［J］. Flow Turbulence and Combustion, 2004,72: 463-492.
［8］ KROGSTAD P, ANTONIA R A. Structure of turbulent boundary layers on smooth and rough walls［J］. Fluid Mech, 1994, 277: 1-20.
［9］ 谭德坤, 刘莹. 壁面粗糙度效应对微流体流动特性的影响［J］. 中国机械工程, 2015, 26(9): 1 210-1 214.
［10］ PER J B, FRANCOIS P, AREND D, et al. Coupled population balance-CFD simulation of droplet breakup in a high pressure homogenizer［J］. Computers and Chemical Engineering, 2014, 68: 140-150.
［11］ PAOLO C, ANDREA V, GIAN L B. A numerical procedure for predicting the performance of high pressure homogenizing valves［J］. Simulation Modelling Practice and Theory, 2010, 18: 125-138.
［12］ AKIRA S, JUNZO S, TAKEO N, et al. Effect of back pressure on emulsification of lipid nanodispersions in a high-pressure homogenizer［J］. International Journal of Pharmaceutics, 2012, 422: 489-494.
［13］ ANDREAS H, LASZLO F, FREDRIK I, et al. Experimental validation of k-䥺SymboleA@ RANS-CFD on a high-pressure homogenizer valve［J］. Chemical Engineering Science, 2012, 71: 264-273.