Abstract
The kinematics characteristic of planar-linkage mechanism is analyzed based on mechanism theory. Through digital modeling and dynamic simulation technology, a functional simulation model of crank-rocker mechanism is set up, and then the design parameters of kinematic are obtained. Because boundary conditions of the finite element model is defined through seamless input of dynamic loads on Simulation modules, stress and deformation analysis of individual component and different subassembly are realized conveniently, and the accuracy and reliability of the statics analysis is improved effectively. Frequency and vibration mode of the mechanism in limit position are calculated through modal analysis. Besides, modal characteristic of the mechanism in limit position is optimized by ANSYS software, and then dynamic characteristic of the mechanism is improved effectively.
Publication Date
5-28-2017
First Page
125
Last Page
127,215
DOI
10.13652/j.issn.1003-5788.2017.05.026
Recommended Citation
Pengfei, HUANG
(2017)
"Study on mechanical property of planar-lonkage mechanism,"
Food and Machinery: Vol. 33:
Iss.
5, Article 26.
DOI: 10.13652/j.issn.1003-5788.2017.05.026
Available at:
https://www.ifoodmm.cn/journal/vol33/iss5/26
References
[1] 潘金坤. 平面连杆机构的6σ稳健优化设计[J]. 机械传动, 2011, 35(8): 40-43.
[2] 陈赛克, 凌轩. 基于Solidworks齿轮连杆机构的运动仿真[J]. 食品与机械, 2012, 28(6): 177-179.
[3] 郭惠昕, 岳文辉. 含间隙平面连杆机构运动精度的稳健优化设计[J]. 机械工程学报, 2012, 48(3): 75-81.
[4] 成大先. 机械设计手册单行本[M]. 4版. 北京: 化学工业出版社, 2004: 68-74.
[5] 安培文, 黄茂林. 平面连杆机构的自调及其允差的分析研究[J]. 中国机械工程, 2002, 13(23): 2 040-2 044.
[6] 朱伯芳. 有限单元法原理与应用[M]. 3版. 北京: 中国水利水电出版社, 知识产权出版社, 2009: 112-113.
[7] 刘志刚. 基于MATLAB的曲柄摇杆机构优化分析[J]. 食品与机械, 2014, 30(2): 114-117.