Abstract
For adapting to high speed development of the rotating machinery, the dynamic simulation was studied based on a box of certain typed reducer. The rotational speed and output loads of the reducer were simulated by step function, and dynamic simulation and loads calculation of the reducer were done in environment of ADAMS/View. Finite element model of the reducer box was set up by ANSYS platform, and harmonic response analysis of the box was carried out on the basis of its modal analysis, thus then curves such as amplitude-frequency response, stress-frequency response from 45 Hz to 115 Hz were acquired, and the results of the harmonic response was verified analysis which combined with some key modal frequencies and vibration modes. All of above provided some important basis for structure design and dynamic optimization of support parts in box type.
Publication Date
6-28-2017
First Page
101
Last Page
104
DOI
10.13652/j.issn.1003-5788.2017.06.020
Recommended Citation
Haifei, QIU
(2017)
"Dynamic analysis and simulation study for support parts of rotating machinery,"
Food and Machinery: Vol. 33:
Iss.
6, Article 20.
DOI: 10.13652/j.issn.1003-5788.2017.06.020
Available at:
https://www.ifoodmm.cn/journal/vol33/iss6/20
References
［1］ 王娟, 李同杰, 姚智华, 等. 行星齿轮减速器均载性能动态的优化设计［J］. 食品与机械, 2016, 32(2): 71-74.
［2］ 李涛涛, 李崚湾, 张争艳, 等. 同步双驱动多级混合齿轮减速器的刚体动力学研究［J］. 机械设计, 2013, 30(8): 39-43.
［3］ 俞黎明. 减速器箱体阻尼减振研究［D］. 哈尔滨: 哈尔滨工程大学, 2010: 58-60.
［4］ 张一帜. 弹性基础减速器减振措施［J］. 煤炭技术, 2005(11): 27-28.
［5］ 邱海飞. 机械系统柔性建模方法与仿真研究［J］. 机械传动, 2016(12): 169-172.
［6］ 许冯平, 夏有山. 基于Pro/E和ADAMS的三环减速器的仿真分析及方法［J］. 现代制造工程, 2014(7): 61-64.
［7］ 邱海飞. 织机机架结构减振技术研究［J］. 丝绸, 2016, 53(7): 32-37.
［8］ WEI Sheng-li, PAN Lu. Design of Shipborne Reducer Box Dam-ping in Reducing Vibration［J］. Applied Mechanics and Materials, 2014, 2 825(455): 585-592.
［9］ 张媛, 冷崇杰, 王晶. 行星齿轮减速器内齿圈模态分析［J］. 食品与机械, 2010, 26(1): 110-112.
［10］ 于洋, 戴光昊, 朱振荣, 等. 行星齿轮减速器振动噪声特性仿真分析［J］. 舰船科学技术, 2014(6): 111-116.
［11］ 周建星, 孙文磊, 刘更. 齿轮减速器振动噪声研究进展［J］. 机械传动, 2014(6): 163-170.
［12］ 范永波, 王端志, 陈红波, 等. 减速器壳体结构振动与辐射噪声分析［J］. 强度与环境, 2012(3): 39-44.