Abstract
High speed variable pitch timing screw is an important foundation component of feeding system in packaging machinery. It is the throat of the whole equipment. In this paper, the artificial bee colony algorithm is employed to optimize the structure parameters of the screw, providing a basis for the design of maximum number of circles. The high speed variable pitch timing screw optimization model takes the minimum total length of the variable pitch screw helix as the optimization goal, with maximum number of helix circles as design variables, the plugging effect on the packaging container is kept, as well as the rate of acceleration change is no more than the predetermined value as the constraint conditions. The results show that the maximum numbers of helix circles obtained by artificial bee colony algorithm can effectively reduce the total length of variable pitch timing screw. It is useful for the reasonable selection of high speed variable pitch timing screw structure parameters.
Publication Date
8-28-2017
First Page
66
Last Page
70
DOI
10.13652/j.issn.1003-5788.2017.08.015
Recommended Citation
Quanlai, LI
(2017)
"Optimization of high speed variable pitchtiming screw based on artificial bee colony algorithm,"
Food and Machinery: Vol. 33:
Iss.
8, Article 15.
DOI: 10.13652/j.issn.1003-5788.2017.08.015
Available at:
https://www.ifoodmm.cn/journal/vol33/iss8/15
References
[1] 黄颖为. 包装机械结构与设计[M]. 北京: 化学工业出版社, 2007.
[2] 赵静, 张金, 支雷, 等. 基于UG的变距供送螺杆数控编程研究[J]. 红河学院学报, 2015, 13(5): 40-42.
[3] 周为, 赵静, 张金. 变距供送螺杆参数化设计[J]. 赤峰学院学报: 自然科学版, 2014, 30(10): 24-26.
[4] 余剑武, 舒新, 罗红, 等. 灌装机中弧面凸轮建模与造型研究[J]. 食品与机械, 2016, 32(6): 77-82.
[5] 吴锦虹, 林楚平. 全自动自立袋充填旋盖机送袋机构及灌装阀的改进[J]. 食品与机械, 2015, 31(6): 117-119, 168.
[6] 万久远. 特种供送螺杆关键技术研究[D]. 秦皇岛: 燕山大学, 2015: 1-7.
[7] 高永绪. 变螺距供送螺杆的原理与计算[J]. 包装与食品机械, 1993, 11(2): 18-20.
[8] 赵静, 张金, 査新龙, 等. 变距供送螺杆数学模型的研究[J]. 盐城工学院学报: 自然科学版, 2014, 27(4): 37-41.
[9] 李军霞, 姚云峰, 史荣. 分件供送变螺距螺杆螺旋线形式的探讨[J]. 包装工程, 2009, 30(11): 50-52.
[10] 章建浩. 高速分件供送螺杆装置的优化设计[J]. 包装与食品机械, 1990(Z1): 29-33.
[11] 郭广颂, 陈良骥. 一种综合咖啡智能拼配方法研究[J]. 食品与机械, 2017, 33(3): 195-198.
[12] 王娟, 李同杰, 姚智华, 等. 行星齿轮减速器均载性能动态的优化设计[J]. 食品与机械, 2016, 32(2): 71-74.
[13] 王小勇, 李兵, 曾晨. 茶叶理条工艺的人工神经网络优化[J]. 食品与机械, 2016, 32(1): 103-105, 153.
[14] 刘静, 管骁, 易翠平. 近红外光谱技术结合支持向量机对食用醋品牌溯源的研究[J]. 食品与机械, 2016, 32(1): 38-40, 52.
[15] 江铭炎, 袁东风. 人工蜂群算法及其应用[M]. 北京: 科学出版社, 2014.
[16] 钟昌清, 张永林. 高速分件供送螺杆的模态分析[J]. 包装工程, 2014, 35(3): 69-73.
[17] KARABOGA D, BASTURK B. On the performance of artif-icial bee colony (ABC) algorithm[J]. Applied Soft Computing, 2008, 8(1): 687-697.
[18] 毕晓君, 王艳娇. 约束多目标人工蜂群算法[J]. 吉林大学学报: 工学版, 2013, 42(2): 397-403.