Abstract
In order to solve the existing problems of air separation equipment of high energy consumption, loss of moisture and temperature, circulating air was used to reduce energy consumption, moisture and temperature dissipation, and the energy-saving multiple-silk air separation system was developed. The system was composed of material uniform and dilution, first and second cycle the air separation systems, dust extraction pipe and other devices. Through uniform thinning of the material, both the side and vertical air entered and floated to improve wind effect, by the first and second cycle air separation systems. 90% of the circulated air were utilized to reduce the energy consumption and water loss. Moreover, system sealed with a closed conveyer belt combined with a miscellaneous gas locking device was used to prevent dust. The processing and product quality and energy consumption for the Energy-saving between both the circulation wind type of multi-stage winnowing and traditional air separation device were compared. The results show that, compared with the later, the former resulted in the temperature increasing by 6.2 ℃, the moisture content increasing by 0.3 percentage points, and energy consumption reducing by more than 50%，with the almost similar cigarette quality.
Publication Date
8-28-2017
First Page
94
Last Page
97
DOI
10.13652/j.issn.1003-5788.2017.08.021
Recommended Citation
Guocheng, ZHU; Jiaxin, WEI; Hongmin, GUO; Shufang, LI; Lihong, CAO; Lei, FAN; and Weimin, SONG
(2017)
"Development and application of energy-saving multiple-silk air separation system,"
Food and Machinery: Vol. 33:
Iss.
8, Article 21.
DOI: 10.13652/j.issn.1003-5788.2017.08.021
Available at:
https://www.ifoodmm.cn/journal/vol33/iss8/21
References
[1] 张辉, 孙小龙, 戈方, 等. 一种烘后叶丝松散、筛分并风选的方法[J]. 科技创新导报, 2012(10): 227.
[2] 李春光, 孙觅, 刘强, 等. 叶丝风选工艺实用性评价[J]. 烟草科技, 2010(3): 5-7.
[3] 张良斌, 罗富炜, 范明登, 等. ET22型风分器结构优化改进及应用[J]. 食品与机械, 2016, 32(9):74-76.
[4] 江威, 张国智, 冯志斌, 等. 利用烟丝含签率检测仪研究加工工艺对烟支含签率的影响[J]. 食品与机械, 2014, 30(5):161-166, 228.
[5] 姚光明, 刘朝贤, 尤长虹, 等. FX型就地风选器在制丝线上的应用试验[J]. 烟草科技, 2003(8): 3-5.
[6] 熊安言, 彭桂新, 姚光明, 等. 薄层物料双面喷射式加料系统的研制与应用[J]. 烟草科技, 2015, 48(9): 81-87.
[7] 顾芳珍, 刘燕. 气流干燥器的优化设计[J]. 天津大学学报, 1996(3): 22-24.
[8] 叶德全. 切向落料器结构的改进设计[J]. 烟草科技, 1998(1): 15-16.
[9] 国家烟草专卖局. 卷烟工艺规范[S]. 北京: 中央文献出版社, 2013: 66-78.
[10] 国家烟草专卖局. GB 5606.4—2005 卷烟 第3部分: 包装、卷接技术要求及贮运[S]. 北京: 中国标准出版社, 2005: 1-2.
[11] 全国烟草标准化技术委员会卷烟分技术委员会. YC/T 151.2—2001 卷烟 端部掉落烟丝的测定 第2部分: 旋转箱法[S]. 北京: 中国标准出版社, 2001: 1-2.