Abstract
A set of grain moisture detection device based on incident microwave was designed, and the STC89C52 chip was used as the main processor to control the execution order of each component. Moreover, the photoelectric switch was used to keep the amount of the loading material in line. In order to eliminate the influence of temperature, it was detected in real time, and the temperature compensation model is established. To avoid the thermal effect of microwave, the sequential control system was applied to collect temperature and microwave signals, ensuring the accurate measurement of grain moisture. The results showed that the correlation coefficient between actual moisture content and microwave moisture content was greater than 0.96, and it could meet the requirements of actual test.
Publication Date
9-28-2017
First Page
81
Last Page
83
DOI
10.13652/j.issn.1003-5788.2017.09.017
Recommended Citation
Baowen, XU; Jianrong, CAI; Li, SUN; Wensong, ZHANG; Yuting, AN; and Zhenlu, HE
(2017)
"Design of grain moisture detection device,"
Food and Machinery: Vol. 33:
Iss.
9, Article 17.
DOI: 10.13652/j.issn.1003-5788.2017.09.017
Available at:
https://www.ifoodmm.cn/journal/vol33/iss9/17
References
[1] 周显青, 赵希雷, 张玉荣, 等. 谷物水分检测技术现状与展望[J]. 粮食加工, 2015, 40(4): 29-34.
[2] 汪安, 吴扬, 刘权. 针刺式谷物含水率检测仪设计[J]. 食品与机械, 2016, 32(9): 67-70.
[3] 臧俊, 董玉德, 万志强, 等. 一种快速检测粮食水分的数据处理方法研究[J]. 装备制造技术, 2012(9): 23-25.
[4] 刘培, 林建华, 王宏伟. 基于微波的粮食水分检测密度无关算法[J]. 中国粮油学报, 2015, 30(6): 113-116.
[5] 伟利国, 张小超, 李福超, 等. 基于微波的粮食水分检测系统设计[J]. 电子设计工程, 2010, 18(4): 1-3.
[6] 李博识, 赵晨, 赵晶. 粮食水分检测技术的研究[J]. 农业科技与信息, 2017(2): 27-28.
[7] AICHHOLZER A, ARTHABER H, SCHUBERTH C, et al. Non-destructive evaluation of grain angle, moisture content and density of spruce with microwaves[J]. European Journal of Wood and Wood Products, 2013, 71(6): 779-786.
[8] WANG Hong-wei, LI Qi-jun, WANG Zhan-hou. Study on the frequency bands applied in grains' moisture measurement[J]. Applied Mechanics and Materials, 2013, 421: 438-443.
[9] 顾颢, 张世庆, 蔡健荣, 等. 基于微波的大米水分快速检测研究[J]. 食品科技, 2015, 40(6): 318-321.