Research of braking way with electric control and oil free of food bucket elevator

Authors

JIN Huawei, School of Mechanical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China; Experimental Center of Mechanical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China
ZHANG Xin, School of Mechanical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China; Experimental Center of Mechanical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China
CHEN Qinghua, School of Mechanical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China; Experimental Center of Mechanical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China
XU Shaoyang, School of Mechanical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China
WANG Sai, School of Mechanical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China

Abstract

The electrical-mechanical brake device with food bucket elevator was designed, based on the traditional hydraulic braking effectiveness. The calculation of "motor + planetary gear reducer + spiral" was conducted, and the movement conversion device, dc torque motor and deceleration moment were analyzed. Moreover, the test was studied by using the similarity principle. The results showed that brake equipment operation of the electrical-mechanical brake device with food bucket elevator was stable and reliable, and brake disc vibration was small. The brake block was quickly, with the parts running normally, and structure design was reasonable. Finally, the food oil free, and the sterile productions were realized. The design could satisfy the food bucket elevator normal brake job needs and the food hygiene requirements.

Publication Date

9-28-2017

First Page

108

Last Page

110,155

DOI

10.13652/j.issn.1003-5788.2017.09.023

Recommended Citation

Huawei, JIN; Xin, ZHANG; Qinghua, CHEN; Shaoyang, XU; and Sai, WANG (2017) "Research of braking way with electric control and oil free of food bucket elevator," Food and Machinery: Vol. 33: Iss. 9, Article 23.
DOI: 10.13652/j.issn.1003-5788.2017.09.023
Available at: https://www.ifoodmm.cn/journal/vol33/iss9/23

References

[1] 中国食品科学技术学会秘书处. 坚守食品安全底线 巩固产业健康转型: 2017年国际食品安全大会4月在京启幕[J]. 食品与机械, 2016, 33(3): 1-2, 109.
[2] 陈雨萌. 中国食品安全监管中行政法的规制研究[J]. 食品与机械, 2016, 32(8): 227-229.
[3] 虎自平, 曹新华, 宁有才, 等. 斗式提升机的结构分析及改进[J]. 现代食品, 2016(1): 74-76.
[4] 赵艳平, 马利平, 贾佳, 等. 胶带斗式提升机张紧装置探析[J]. 粮油食品科技, 2016, 24(3): 108-110.
[5] 贺新华. 斗式提升机的参数化设计及仿真分析[D]. 长春: 吉林大学, 2015: 28-40.
[6] 薛晓金, 姜学鹏, 马鹏飞, 等. 斗式提升机的结构分析及改进[J]. 粮食与食品工业, 2014, 21(1): 72-74.
[7] FRANK Schumann. Method for oferating an electromechanical wheel brake device: US, 6305508[P]. 2001-10-23.
[8] CHIH Feng Lee, CHRIS Manzie. Active brake judder attenu-ation using an electromechanical brake-by-wire system[J]. IEEE-Asme Transactions on Mechatronics, 2016, 21(6): 2 964-2 976.
[9] ATIA M RA, KAMAL A MM, HAGGAG SA, et al. Enhanced electromechanical brake-by-wire system using sliding mode controller[J]. Journal of Dynamic Systems Measurement and Control- Transactions of the Asme, 2016, 138(4): 120-125.
[10] 李伯全, 董现伦, 何仁, 等. 基于EMB和路面自动识别的汽车ABS仿真[J]. 机械设计与制造, 2009(9): 186-188.
[11] 田甜. 四轮独立驱动电动底盘设计及试验研究[D]. 北京: 中国农业机械化科学研究院, 2012: 39-43.