Abstract
In order to find out the optimal quantity of cut tobacco rolling back for cigarette machine, a model was built according to cigarette features, ecreteur specifications and the track of cut tobacco adsorbed specifications based on the principle of cigarette processing. The quantity of tobacco rolling back which calculated by this model could be appropriate through application cases, and this quantity of tobacco rolling back could provide the enough cut tobacco for cigarette. Moreover, it also could reduce the cigarette dust content and promote the quality of cigarette. The method calculating the quantity of cut tobacco rolling back promoted by this model was convenient to implement with no limiting of machine type, specifications of cigarette and materials.
Publication Date
10-28-2018
First Page
217
Last Page
220
DOI
10.13652/j.issn.1003-5788.2018.10.043
Recommended Citation
Hu, XIANG; Xiaoqiang, HE; Long, WANG; Yusheng, ZOU; Geyi, LIU; Tao, YANG; and Shaochen, LI
(2018)
"The optimal quantity of cut tobacco rolling back calculating model for cigarette machine based on its feature and the principle of cigarette processing,"
Food and Machinery: Vol. 34:
Iss.
10, Article 43.
DOI: 10.13652/j.issn.1003-5788.2018.10.043
Available at:
https://www.ifoodmm.cn/journal/vol34/iss10/43
References
[1] 陈智鸣, 吴敬华, 杜媚, 等. 卷接机回丝量与卷烟卷制质量的相关性研究[J]. 大众科技, 2011(11): 96-97, 107.
[2] 贺万华, 曹兴洪, 范康君, 等. 卷烟制丝和卷制过程中主要质量指标与消耗指标的关系及评价方法[J]. 中国烟草学报, 2007, 13(5): 17-22.
[3] 叶侠英, 刘娟娟. 卷烟端部落丝量与烟丝含末率关系研究[J]. 江西食品工业, 2009(2): 34-35.
[4] 倪建彬. 卷烟吸阻稳定性的研究[D]. 杨凌: 西北农林科技大学, 2008: 7-10.
[5] 郭妮, 杨维平, 李明. PASSIM卷接机组供丝量的统计分析[J]. 烟草科技, 2014(3): 21-23, 28.
[6] 孙宇, 初杰. 卷接机组烟丝最佳回丝量的确定[J]. 烟草科技, 2000(10): 10-11.
[7] 菅威, 杨时政, 宋金华, 等. PROTOS70卷烟机工艺参数与烟支重量控制稳定性的关系研究[J]. 安徽农学通报, 2013(20): 95-96, 109.
[8] 吕祥敏, 赵朋贤, 李秋彤, 等. 控制图在卷烟质量稳定性中的应用[J]. 安徽农业科学, 2012(10): 6 171-6 172, 6 215.
[9] 于建军. 卷烟工艺学[M]. 北京: 中国农业出版社, 2009: 258-261.