Abstract
In order to improve the accuracy and repeatability of the integration quantitative determination method based on ImageJ for the ash from the burning cigarette., an optimized scheme was conducted in this study. The scheme was optimized from three aspects, including the selection of cigarette combustion surface, the selected height as well as the width of the burning cigarette columnar ash. The established optimal scheme was as follows: ① Taking pictures of the burning cigarette when it was burned to 1 cm away from the tipping paper. ② Using a height of 25 mm, 6.46 mm width rectangular box to select the bottom of the gray column as a starting point for analysis of the picture area. ③ The final result of the ash integration was taken from the average of three cigarettes and three burning surfaces (the surface, opposite face and the side face of lapped cigarette paper ). This program could weaken the influence of the lapped cigarette paper, the curvature of the ash as well as the outer ash on the repeatability of measurement results. In addition, this optimized method could reflect the true ash integration character more comprehensively. The application of this method indicated that the RSD of the four samples reduced from 26.18% ~ 34.52% to 15.3% ~ 20.6%, suggesting a significant improvement in accuracy and repeatability.
Publication Date
3-28-2018
First Page
216
Last Page
219
DOI
10.13652/j.issn.1003-5788.2018.03.045
Recommended Citation
Yajie, FENG; Jianmin, WANG; Miao, LIANG; Lin, MU; Shengnan, MA; Huaixu, WANG; and Linghe, XU
(2018)
"Optimization of the quantitative determination method of the burning cigarette ash integration based on ImageJ,"
Food and Machinery: Vol. 34:
Iss.
3, Article 45.
DOI: 10.13652/j.issn.1003-5788.2018.03.045
Available at:
https://www.ifoodmm.cn/journal/vol34/iss3/45
References
［1］ 李桂珍, 王平军. 卷烟纸添加剂对卷烟包灰性能影响的研究［J］. 造纸化学品, 2011, 23(4): 18-21.
［2］ 孙川, 桂永发, 许永, 等. 卷烟纸燃烧调节剂对卷烟燃烧性能的影响［J］. 广东化工, 2008(3): 71-74.
［3］ 于龙国. 卷烟纸相关因素对卷烟包灰性能影响分析［J］. 中华纸业, 2015, 36(6): 37-40.
［4］ 宋微, 李磊. 卷烟纸主要性能的影响因素和控制方法［J］. 造纸化学品, 2011, 23(4): 25-26.
［5］ 李赓, 丁海燕, 孙军, 等. 改善卷烟纸包灰效果的研究［J］. 中国造纸, 2012, 31(8): 32-34.
［6］ 邹中亮, 侯鑫. 卷烟纸定量、透气度对卷烟包灰及燃烧速度的影响［J］. 黑龙江造纸, 2013, 41(2): 35-37.
［7］ 熊安言, 李善莲, 丁美宙, 等. 卷烟生产过程质量稳定性评价方法的设计及应用［J］. 食品与机械, 2017, 33(2): 183-188.
［8］ 丁美宙, 刘欢, 刘强, 等. 梗丝形态对细支卷烟加工及综合质量的影响［J］. 食品与机械, 2017, 33(9): 197-202.
［9］ 程占刚, 叶明樵, 胡素霞, 等. 影响卷烟包灰能力的因素研究［J］. 烟草科技, 2011(2): 10-12.
［10］ 王道宽, 连芬燕, 刘雯, 等. 卷烟包灰性能的影响因素［J］. 烟草科技, 2013(4): 12-15.
［11］ 孙水发, 董方敏. ImageJ图像处理与实践［M］. 北京: 国防工业出版社, 2013: 124-203.
［12］ 国家烟草专卖局. GB/T 16447—2004 烟草及烟草制品调节和测试的大气环境［S］. 北京: 中国国家标准化管理委员会, 2004: 1-2.
［13］ 李桂珍, 骆永昌, 连芬燕, 等. 卷烟包灰性能的测定方法: 中国, 201010119032.5［P］. 2011-09-21.