Abstract
The TRIZ (theory of inventive problem solving) helped to solve the innovative design of the entire tank system. Through the analysis of the interaction between components, the conclusion was drawn that the use of artificially stirred iron ladles to agitate milk was insufficient. Using physical contradiction analysis, according to the degree of bending of the stirring device due to different heights during operation the dynamic characteristics A motor-driven, retractable and flexible mechanism was designed. The solid works of three-dimensional software was used to build a specific snoring mechanism model, and the feasibility of the flexible arm work was verified through experiments. The test results showed that the flexible arm could complete the compression, elongation, bending, twisting and other gestures, and achieve a wider range of agitation.
Publication Date
7-28-2018
First Page
83
Last Page
85,105
DOI
10.13652/j.issn.1003-5788.2018.07.017
Recommended Citation
Guohua, GAO; Juan, HUANG; and Jichao, LIU
(2018)
"Design of stirring mechanism in milk tanker based on TRIZ theory,"
Food and Machinery: Vol. 34:
Iss.
7, Article 17.
DOI: 10.13652/j.issn.1003-5788.2018.07.017
Available at:
https://www.ifoodmm.cn/journal/vol34/iss7/17
References
[1] 高子娟, 梁永明. 基于加权平均法的鲜奶最佳运输时间的探索[J]. 科技致富向导, 2011(18): 51-51.
[2] 张少辉, 莫蓓红, 田雷. 搅拌型酸奶生产过程中粘度变化的研究[J]. 中国乳品工业, 2002, 30(1): 31-36.
[3] 田亚芳. XKC5080GYSA3型奶罐车的设计与试验研究[J]. 河南机电高等专科学校学报, 2010, 18(3): 28-30.
[4] 黄志刚. 奶罐车液压驱动搅拌系统[J]. 工程技术:文摘版, 2016(4): 304.
[5] 陈登丰. 搅拌器和搅拌容器的发展[J]. 压力容器, 2008, 25(2): 33-41.
[6] 韩丹, 李龙, 程云山, 等. 叶轮式搅拌器的研究进展[J]. 合成橡胶工业, 2005, 28(1): 71-74.
[7] 仪维, 王即武, 廉爱东, 等. 一种智能牛奶加热搅拌器的设计[J]. 机电一体化, 2017(5): 64-67.
[8] 徐峰. 国外企业应用创新方法的经验与启示[J]. 中国科技论坛, 2009(8): 140-144.
[9] 陈敏慧, 蒋艳萍, 吕建秋. TRIZ国内外研究现状、存在问题及对策研究[J]. 科技管理研究, 2015, 35(1): 24-27.
[10] 高常青, 黄克正, 张勇. TRIZ理论中问题解决工具的比较与应用[J]. 机械设计与研究, 2006, 22(1): 13-15.
[11] 张简一, 郭艳玲, 杨树财, 等. 基于TRIZ理论的产品创新设计[J]. 机械设计, 2009, 26(2): 35-38.
[12] 高国华, 马帅. 基于离散单元分析与物场分析的盆花移栽手爪优化[J]. 农业工程学报, 2017, 33(6): 35-42.
[13] 高国华, 刘群. 盆花筑模成穴机构创新优化设计[J]. 北京工业大学学报, 2017, 43(7): 987-995.
[14] 张丹, 常宏, 娄高翔, 等. 基于TRIZ理论的螺纹口食品瓶清洗机创新设计[J]. 食品与机械, 2017, 33(3): 84-87.