Abstract
In order to calibrate the joint angle of industrial robot quickly and accurately, a calibration system of industrial robot based on point constraint is designed. The principle is to calibrate the laser beam to irradiate in the center of the first PSD (Position Sensing Device) and reflected to the second PSD center in four positions by controlling the laser pointer on the end-effector of the industrial robot, and obtain four groups of joint angles, and calculate the linear equations of the position and orientation of the end-effector by the joint angles respectively. According to the fact that the intersection point of each linear equation is the same point (point constraint), the Isqnonlin function is used to search the angle deviation of industrial robot joint. Based on the model of calibration system, six calibration experiments are carried out with ABB Company's IRB120 industrial robot as the experimental platform. The experimental results show that the industrial robot calibration system based on point constraints can calculate the J2~J6 joint angle deviation of the industrial robot quickly and accurately, and the joint angle J1 cannot be calibrated temporarily because of the transformation matrix.
Publication Date
3-28-2019
First Page
89
Last Page
93,143
DOI
10.13652/j.issn.1003-5788.2019.03.016
Recommended Citation
Zhihui, DENG; Chenyang, DING; and Xiliang, ZHANG
(2019)
"Research on industrial robot calibration system based on point constraint,"
Food and Machinery: Vol. 35:
Iss.
3, Article 16.
DOI: 10.13652/j.issn.1003-5788.2019.03.016
Available at:
https://www.ifoodmm.cn/journal/vol35/iss3/16
References
[1] MARKO S, BOJAN S, FILIP S, et al. Calibration of an industrial robot using a stereo vision system[J]. DAAAM Vienna, 2014, 3(12): 459-463.
[2] ZHANG Dan, GAO Zhen. Optimal kinematic calibration of parallel manipulators with pseudo error theory and cooperative coevolutionary network[J]. Transactions on Industrial Electronics, 2012, 8(59): 3 221-3 231.
[3] 李琚陈, 曾谊晖. 六关节工业机器人工作空间及轨迹规划仿真[J]. 食品与机械, 2017, 33(10): 98-103.
[4] 王惠. 基于PSD 的工业机器人无标定伺服定位系统[J]. 机床与液压, 2017, 45(3): 106-108.
[5] 黄冠成, 陈新度. 工业机器人末端执行器的柔顺示教研究[J]. 机械设计与制造, 2017(12): 255-257.
[6] NUBIOLA A, BONEV A. Absolute calibration of an ABB IRB 1600 robot using a laser tracker[J]. Robotics and Computer-Integrated Manufacturing, 2013, 29: 236-245.
[7] DENG Xun, CHEN Zhong, LIANG Jia-hui. Calibration of a robot vision system coupled with structured light: method and experiments[J]. Intelligent Robotics and Applications, 2014, 8 918: 256-264.
[8] NUBIOLA A, BONEV A. Absolute robot calibration with a single telescoping ballbar[J]. Precision Engineering, 2014, 38: 472-480.
[9] NUBIOLA A, SLAMANI M, BONEV A. A new method for measuring a large set of poses with a single telescoping ballbar[J]. Precision Engineering, 2013, 2(37): 451-460.
[10] RADKHAH K, HEMKER T, STRYK O. Self-calibration for industrial robots with rotational joints[J]. International Journal of Mechatronics and Manufacturing Systems, 2010, 3(4): 187-209.
[11] VUOLA A, TUOKKO R. Accuracy measurements of miniature robot using optical CMM[J]. Precision Assembly Technologies and Systems, 2012(371): 126-133.
[12] 时定兵. 基于点约束的机器人运动学参数标定技术[D]. 南京: 南京理工大学, 2014: 10-24.
[13] 丁吉祥. 工业机器人运动学参数标定技术研究[D]. 南京: 南京理工大学, 2015: 17-26.