Study on characteristics of gas holdup in new self-inspirating gas-liquid stirred tank

Authors

GAO Yong, School of Chemistry and Chemical Engineering, Yulin University, Yulin, Shaanxi 719000, China; Shaanxi Key Laboratory of Low Metamorphic Coal Clean Utilization, Yulin, Shaanxi 719000, China
HAO Huidi, School of Chemical Engineering, Northwest University, Xian, Shaanxi 710069, China
DANG Rui, School of Chemistry and Chemical Engineering, Yulin University, Yulin, Shaanxi 719000, China; Shaanxi Key Laboratory of Low Metamorphic Coal Clean Utilization, Yulin, Shaanxi 719000, China
FAN Xiaoyong, School of Chemistry and Chemical Engineering, Yulin University, Yulin, Shaanxi 719000, China; Shaanxi Key Laboratory of Low Metamorphic Coal Clean Utilization, Yulin, Shaanxi 719000, China
CAO Baowei, School of Chemistry and Chemical Engineering, Yulin University, Yulin, Shaanxi 719000, China; Shaanxi Key Laboratory of Low Metamorphic Coal Clean Utilization, Yulin, Shaanxi 719000, China

Abstract

The gas holdup in a new self-inspirating gas-liquid stirred tank with dual impellers was studied. The effects of blades angle of gas dispersion channel, stirring speed, medium viscosity and impeller combinations on gas holdup were analyzed. The results showed that when the blades angle of gas dispersion channel was 30°, more gas could be induced at the same speed or inputting power. The gas holdup increases with the increaseed of stirring speed and medium viscosity. The suitable impeller combination was 6SBDT+6PBUT. This combination had a higher rate of gas induction and ability of gas dispersion, and had a higher gas holdup. The relationship between gas holdup and unit volume power consumption was ε∝（P_g/V）^2.4, as the unit volume power consumption increasesed, the gas holdup increasesed signific-antly, the effect of gas-liquid dispersion was better, and the mass transfer efficiency was higher.

Publication Date

6-28-2019

First Page

85

Last Page

89

DOI

10.13652/j.issn.1003-5788.2019.06.015

Recommended Citation

Yong, GAO; Huidi, HAO; Rui, DANG; Xiaoyong, FAN; and Baowei, CAO (2019) "Study on characteristics of gas holdup in new self-inspirating gas-liquid stirred tank," Food and Machinery: Vol. 35: Iss. 6, Article 15.
DOI: 10.13652/j.issn.1003-5788.2019.06.015
Available at: https://www.ifoodmm.cn/journal/vol35/iss6/15

References

[1] 刘庭耀. 气—液两相搅拌釜流体行为的数值模拟研究[D]. 北京: 北京科技大学, 2017: 10.
[2] 郝惠娣, 朱娜, 秦佩, 等. 单层桨气液搅拌釜的气液分散特性[J]. 石油化工, 2014, 43(6): 669-674.
[3] 丁程兵, 陈迁乔, 钟秦. 三种湍流模型下搅拌釜内气含率特性的模拟[J]. 化工进展, 2013, 32(11): 2 569-2 573, 2 578.
[4] 温佳文, 石东升, 宋晓丽, 等. 自吸式反应器功率消耗与气含率的研究进展[J]. 食品与机械, 2012, 28(4): 241-244.
[5] ABDULLAH B, DAVE C, NGUYEN T H, et al. Electrical resistance tomography-assisted analysis of dispersed phase hold-up in a gas-inducing mechanically stirred vessel[J]. Chemical Engineering Science, 2011(66): 5 648-5 662.
[6] 肖欣, 杨宁. 基于EMMS模型的搅拌釜内气液两相流数值模拟[J]. 化工学报, 2016, 67(7): 2 732-2 739.
[7] 张庆文, 骆巍, 刘永垒, 等. CFD数值模拟在柠檬酸发酵罐搅拌系统设计过程中的应用[J]. 现代化工, 2011, 31(7): 86-88, 90.
[8] 张庆文, 蔡子金, 李军庆, 等. 自吸式反应器气液传质实验研究和CFD模拟[J]. 化学工程, 2014, 42(2): 50-54.
[9] 鞠凡. 自吸式搅拌桨优化设计的数学模型[J]. 辽宁工业大学学报: 自然科学版, 2014, 34(5): 326-327, 332.
[10] 刘甜甜, 李玉刚, 郑世清. CFD在自吸式加氢反应器流场研究中的应用[J]. 化工进展, 2017, 36(3): 846-851.
[11] SARAVANAN K, JOSHI J B. Fractional Gas Hold-up in Gas Inducing Type of Mechanically Agitated Contactors[J]. The Canadian Journal of Chmical Engineering, 1996, 74: 16-30.
[12] 李新菊, 管小平, 杨宁, 等. 基于能量最小多尺度曳力模型的搅拌槽内气液两相流计算流体力学模拟及实验研究[J]. 化工进展, 2017, 36(11): 4 000-4 009.
[13] 李红星, 王嘉骏, 冯连芳, 等. 搅拌槽内高黏物系的气液分散特性研究进展[J]. 化工进展, 2012, 31(7): 1 414-1 418.
[14] SARAVANAN K, MUNDALE V D, PATWARDHAN A W, et al. Power consumption in gas-inducing type mechanically agitated contactors[J]. Ind Eng Chem Res, 1996, 35(5): 1 583-1 602.
[15] 高勇, 严彪, 胡军, 等. 双层桨自吸式气液搅拌釜内的功率准数[J]. 石油化工, 2018, 47(3): 259-264.
[16] LINEK V, MOUCHA T, REJL F J, et al. Power and mass transfer correlations for the design of multi-impeller gas-liquid contactors for non-coalescent electrolyte solutions[J]. Chemical Engineering Journal, 2012, 209: 263-272.