Abstract
To solve the problem of low production efficiency of Citrus pericarp in the process of making citrus-pu'er tea, a kind of Citrus pericarp remover was designed. Based on the working principle of circumcision cap, tool cavity opening and high pressure air blowing, the mechanism design of the device was carried out. Taking the pulp removal rate and production efficiency as evaluation indexes, the optimum combination of parameters of the air-blowing mechanism was determined by means of orthogonal test and comprehensive scoring method. The optimum combination of parameters of the air-blowing mechanism was as follows: the diameter of the air hole of the nozzle was 3 mm, the air-blowing pressure was 0.65 MPa, the lift speed of the nozzle was 25 mm/s, and the rotation speed of the nozzle was 150 r/min. Concentrated experiments were carried out on this parameter combination. The results showed that the removal rate of citrus pulp reached 99%, and there was no case of shell damage. The time of capping and peeling is about 6 seconds, and the efficiency was about 3 times of the artificial method, and this effectively improved the production of citrus pericarp.
Publication Date
6-28-2019
First Page
100
Last Page
103,107
DOI
10.13652/j.issn.1003-5788.2019.06.018
Recommended Citation
Donghai, YUE; Qin, TU; and Hongtao, WU
(2019)
"Optimization of design and control parameters of citrus meat removal machine,"
Food and Machinery: Vol. 35:
Iss.
6, Article 18.
DOI: 10.13652/j.issn.1003-5788.2019.06.018
Available at:
https://www.ifoodmm.cn/journal/vol35/iss6/18
References
[1] 期刊通讯员. 掀起全生晒柑普生茶新热潮[J]. 广东茶叶, 2017, 6(3): 39.
[2] 黄伟亮. 柑普茶历史文化探微: 从一首新会童谣说起[J]. 农业考古, 2016, 6(5): 27-32.
[3] 程磊. 柑普, 靠谱[J]. 茶世界, 2016, 12(12): 66-69.
[4] 蔡佳梓, 丁敏, 何新, 等. 新会柑普茶成分分析[J]. 广州化工, 2016, 44(18): 132-136, 168.
[5] 陈家宏. 一种多工位的挖肉机: 中国, 201710761740.0[P]. 2017-08-30.
[6] 黄赛健. 一种多工位的挖肉机: 中国, 201720048187.1[P]. 2017-12-05.
[7] 黄赛健. 多工位开果机: 中国, 201710029743.5[P]. 2017-01-07.
[8] 闻邦椿. 机械设计手册: 带链摩擦轮与螺旋传动[M]. 北京: 机械工业出版社, 2015: 120-125.
[9] 熊学东, 石海强, 曹楠, 等. 采用坐标综合评定法优化相思木硫酸盐法制浆工艺[J]. 中国造纸学报, 2016, 31(1): 1-6.