Abstract
In order to further explore the influential factors and dynamic characteristics of turnover motion in the automatic orientation of pointed end and blunt end of the ovoid agricultural products, to reduce actual test costs, a digital virtual prototype (simulation model) consisting of ovoid products, conveying roller and guide rod is designed and built. Using the ADAMS simulation technology, the process of the ovoid body's turnover motion is simulated, and a measurement method for the rolling distance and effect distance of guide rod in the simulation experiment is created. On this basis, the simulation values and actual test values under different long axis L, short axis B, egg-shaped angle θ, center distance E of the conveying roller, bending angle γ of the guide rod, and conveying speed v are compared and analyzed. The results show that the actual results and the simulation results have the same variation discipline, and the relative error is within 10%. The established simulation model is credible and efficacious, using this model to study the discipline of turnover motion is feasible. It lays the foundation for the research of the oval body agricultural product's turnover motion simulation.
Publication Date
1-28-2020
First Page
104
Last Page
109
DOI
10.13652/j.issn.1003-5788.2020.01.017
Recommended Citation
Song, JIANG; Qi-ying, CHEN; Ti-cao, ZHU; and Zhang-yao, CHEN
(2020)
"Establishment and experimental verification of simulation model on turnover motion of ovoid agricultural products,"
Food and Machinery: Vol. 36:
Iss.
1, Article 17.
DOI: 10.13652/j.issn.1003-5788.2020.01.017
Available at:
https://www.ifoodmm.cn/journal/vol36/iss1/17
References
[1] 张艳龙,李祥辉,聂馨晨,等.农产品上料定向排序技术研究现状[J].新疆农机化,2019(1):12-16.
[2] KIM S H,YOUN D K,NOH K,et al.Effects of chitosan coating and storage position on quality and shelf life of eggs[J].Int J Food Sci Tech,2009,44(7):1 351-1 359.
[3] 王国江.禽蛋自动定向中轴向运动和翻转运动规律的研究及试验台的研制[D].镇江:江苏大学,2013:28-44.
[4] 孙柯.禽蛋大小头自动定向机理及应用研究[D].镇江:江苏大学,2014.
[5] 朱杰.卵形体水果大小头自动定向运动规律的研究[D].镇江:江苏大学,2016.
[6] 王婧.卵形体农产品大小头自动定向中水平偏转角自适应机理及应用[D].镇江:江苏大学,2018.
[7] 孙柯,姜松,朱红力,等.卵形体质量和材质对大小头自动定向运动的影响[J].食品与机械,2014,30(5):72-75,93.
[8] 姜松,孙柯,杨德勇,等.禽蛋大小头自动定向排列中翻转运动机理研究[J].农业机械学报,2014,45(3):215-222.
[9] JIANG Song,SUN Ke,WANG Guo-jiang,et al.Study on the mechanical automatic orientation regulations about the axial and the turnover motions of eggs[J].Journal of Food Engineering,2014,133(2):46-52.
[10] 朱体操.卵形体农产品大小头自动定向中轴向运动的仿真及应用研究[D].镇江:江苏大学,2019.
[11] 贾丹凤.工作参数对卵形体农产品大小头自动定向运动影响的研究[D].镇江:江苏大学,2017.
[12] UPADHYAYA S K,COOKE J R,GATESR S,et al.A finite element analysis of the mechanical and thermal strength of avian eggs[J].Journal of Agricultural Engineering Research,1981,33(1):57-78.
[13] 田湛,李应强.基于ADAMS的锯片磨齿机拨齿机构接触仿真[J].冶金设备,2006(1):27-29,45.
[14] 谢最伟,吴新跃.基于碰撞仿真分析[C]//第三届中国CAE工程分析技术年会论文集.大连:中国机械工程学会机械工业自动化分会,2007:345-348.
[15] 马垚,余经虎.一种苹果定向机构设计及定向单元动力学仿真[J].食品与机械,2016,32(11):55-58.
[16] 刘平,张麟.基于ADAMS的油菜籽仁皮振动分层仿真研究[J].武汉工业学院学报,2011,30(4):24-27.