Abstract
The cam profile of the cylindrical cam mechanism of the bottle cap assembly machine is designed, the curve is fitted, the three-dimensional model of the SolidWorks is established, and the cylindrical cam and the cylindrical cam of the sinusoidal curve fitting are simulated in Adams by the cylindrical cam and the sinusoidal curve fitting of the five polynomial curve fitting. The result of the simulation is compared and analyzed, which shows that the design of the cam wheel can be used in the manufacture of the cylindrical cam mechanism of the actual group cover machine.
Publication Date
1-28-2020
First Page
131
Last Page
135
DOI
10.13652/j.issn.1003-5788.2020.01.022
Recommended Citation
Gan, LI; Cheng-long, YIN; De-fu, JIANG; and Wan, KE
(2020)
"Design and analysis of the cylinder cam mechanism of the group cover machine,"
Food and Machinery: Vol. 36:
Iss.
1, Article 22.
DOI: 10.13652/j.issn.1003-5788.2020.01.022
Available at:
https://www.ifoodmm.cn/journal/vol36/iss1/22
References
[1] 杨奔奔.高速取纸机构主凸轮廓线设计及运动分析[J].食品与机械,2019,35(8):132-134.
[2] 孙秀延.XG_8全自动回转式旋盖机的研制[D].大连:大连理工大学,2008:2-4.
[3] 杨玉霞.基于ADAMS的卷筒纸包装机凸轮机构仿真研究[J].南方农机,2019,50(18):254-256.
[4] 侯成仁,崔海徽,梁庆华.基于运动约束的高速旋盖机设计及其凸轮分析[J].机械制造,2004,42(7):1-3.
[5] 朱育权.直动从动件平面移动凸轮机构的动力学优化设计[J].西安工业大学学报,2019,35(5):529.
[6] 冯敦敦.弧面分度凸轮的理论研究及参数化设计[D].唐山:华北理工大学,2019:32-34.
[7] 李宗成.平面凸轮的CAD/CAM系统设计及研究[D].青岛:青岛科技大学,2019:22-24.
[8] 孙恒,陈作模,葛文杰.机械原理[M].北京:高等教育出版社,2015:181-182.
[9] 吴孟丽.空间星形双凸轮泵的设计与流量脉动分析[J].机械设计,2019,36(10):88-89.
[10] 甘俊杰.PET瓶旋盖机主驱动系统运动特性的研究及设计[D].西安:西安工业大学,2012:12-14.
[11] 何长青.圆柱凸轮CAD_CAM研究开发及在一次性卫生用品自动生产线中的应用[D].合肥:合肥工业大学,2016:9-15.
[12] 郜海超.基于SolidWorks圆柱凸轮建模的优化设计[J].中原工学院学报,2008,19(2):66-68.