Abstract
An optimization method of automatic fermentation system control based on digital signal processing (DSP) was proposed. Aiming at the optimization of the automatic feeding system in the automatic fermentation system, the error feedback control algorithm was used to design the automatic feeding control of the pasta fermentation machinery, and the hardware design of the automatic feeding system of the pasta fermentation machinery was based on the algorithm design. The results showed that the designed automatic feeding system of pasta fermentation machinery had good human-computer interaction and strong system stability, and the control error was only 0.1% when iterating 500 times to achieve precision control.
Publication Date
1-28-2020
First Page
146
Last Page
149,156
DOI
10.13652/j.issn.1003-5788.2020.01.025
Recommended Citation
Li-hua, ZHANG; Tian-fei, DONG; and Wen-zhao, NIU
(2020)
"Design of automatic feeding system for pasta fermentation machinery,"
Food and Machinery: Vol. 36:
Iss.
1, Article 25.
DOI: 10.13652/j.issn.1003-5788.2020.01.025
Available at:
https://www.ifoodmm.cn/journal/vol36/iss1/25
References
[1] 马宇蔡,远利.基于多LPV模型的调度离线鲁棒预测控制[J].控制与决策,2016,31(8):1 468-1 474.
[2] 穆欢,唐兰,孙艳红.多功能热泵干燥装置恒温干燥模式性能研究[J].食品与机械,2019,35(4):93-96.
[3] KOIVUMAKI J,MATTILA J.Stability-guaranteed force-sensorless contact force/motion control of heavy-duty hydraulic manipulators[J].IEEE Transactions on Robotics,2015,31(4):918-935.
[4] 刘潇潇,车军,赵娜,等.3D打印控制系统G代码解释器的设计与实现[J].兰州交通大学学报,2019,38(3):37-40,45.
[5] REN Shao-qing,HE Kai-ming,GIRSHICK R,et al.Faster R-CNN:Towards real-time object detection with region proposal networks[J].IEEE Transactions on Pattern Analysis and Machine Intelligence,2017,39(6):1 137-1 149.
[6] MAITIN-SHEPARD J,CUSUMANO-TOWNER M,LEI J,et al.Cloth grasp point detection based on multiple-view geometric cues with application to robotic towel folding[C]//IEEE International Conference on Robotics and Automation.Piscataway:IEEE,2010:2 308-2 315.
[7] 安嘉强,汤晓华,吴婧,等.奶油蛋糕远程3D打印机器人数控协同机电系统设计[J].食品与机械,2019,35(5):123-126.
[8] 李静,高华钰,沈南燕,等.复杂轴类零件非圆轮廓接触式随动测量方法[J].机械工程学报,2018,54(5):38-46.
[9] 谭文斌,张起鹏,李醒飞,等.θFXZ型测量机的回转轴线标定方法[J].机械科学与技术,2016,35(2):285-289.
[10] 方洁.光通信网络系统信号调制方式的自动识别方法[J].激光杂志,2019,40(5):149-153.