Abstract
In order to improve the precise positioning of micro parts, focusing-Zernike matrix algorithm were proposed. Firstly, coarse and fine combination focus function was established based on the Krisch edge detection operator and Sobel method. Secondly, focusing window was selected dynamically, and the factor was corrected target size of clarity evaluation function, focus direction was judged by improved hill-climbing algorithm. Thirdly, improved Zernike moment was determined the maximum circumscribed unit circle based on the normalization of the target point, and the pixel was judged edge point using edge parameters, then the process was given. Experimental simulation was done by the automatic alignment and stacked microassembly task of two micro cylindrical cavity to analyze the algorithmic. The results showed that the dynamic adjustment algorithm had a clear image and good alignment, and the maximum value of absolute error in x and y directions were 0.032 5 and 0.032 1 pixels per inch, respectively, which had higher positioning accuracy than other algorithms.
Publication Date
2-18-2023
First Page
87
Last Page
92,109
DOI
10.13652/j.issn.1003-5788.2020.10.017
Recommended Citation
ZHANG, Ya-jun
(2023)
"Precise positioning of micro parts based on focusing-Zernike matrix algorithm,"
Food and Machinery: Vol. 36:
Iss.
10, Article 17.
DOI: 10.13652/j.issn.1003-5788.2020.10.017
Available at:
https://www.ifoodmm.cn/journal/vol36/iss10/17
References
[1] 熊保玉,蹇清平.基于宇宙量子算法的微小零件尺寸检测[J].食品与机械,2020,36(1):121-125.
[2] ZHANG Xiao-dong,WU Bin,YANG Zhi-yuan.Position detection of component aperture based on integral imaging technology[J].Journal of Measurement Science and Instrumentation,2017,8(3):238-243.
[3] 范荻,金守峰,陈蓉,等.面向装配机器人的零件视觉识别与定位方法[J].西安工程大学学报,2018,32(1):114-120.
[4] 陈向伟,王海月.基于计算机视觉的轴套零件尺寸测量[J].制造技术与机床,2014(10):85-88.
[5] LIU Zhen-yu,TAN Jian-rong.Constrained behavior manipulation for interactive assembly in a virtual environmen[J].International Journal of Advanced Manufacturing Technology,2007,322(7):797-810.
[6] 谢煌生,刘周林.基于形状匹配的装配定位方法[J].制造技术与机床,2015(5):97-100.
[7] 张习文,王晓东,罗怡.等.跨尺度微小型零件的测量与装配[J].纳米技术与精密工程,2012,10(4):342-347.
[8] WANG Jian-lin,WEI Qing-xuan,ZHAO Li-qiang,et al.An improved empirical mode decomposition method using second generation wavelets interpolation[J].Digital Signal Processing,2018,79(8):164-174.
[9] CHAO Yong,FERNANDEZ Jose,NAHATA Babu.Pay-what-you-want pricing under competition:Breaking the bertrand trap[J].Journal of Behavioral and Experimental Economics,2019,82(10):101 453-101 462.
[10] DENG An-wen,GWO Chih-ying.Efficient computations for generalized Zernike moments and image recovery[J].Applied Mathematics and Computation,2018,339(15):308-322.
[11] 肖作江,朱海滨,徐志刚.基于图像自准直自动调焦技术[J].光子学报,2016,45(10):41-45.
[12] 韦玉科,李江平,段仰广,等.一种基于图像处理的舌象采集自动调焦算法[J].山东大学学报(工学版),2011,41(4):95-100.
[13] 陈洪涛.基于动态因子自适应搜索算法的自动调焦研究[J].工具技术,2016,50(9):105-108.
[14] 赵志丹,周哲海,张晓林,等.光镊系统的粒子自动对焦成像方法研究[J].自动化仪表,2015,36(10):25-28.
[15] 吴叶兰,秦艳红,张之敬.基于显微视觉的微小型零件边缘检测技术研究[J].计算机工程与应用,2016,52(17):266-270.
[16] 文涛,左东广,李站良,等.基于改进小波变换和Zernike矩的亚像素边缘检测算法[J].电光与控制,2015,22(9):50-54.