Abstract
In order to shorten the filtration period of wort in the lauter tun and improve the quality of wort, A bionic raking knife suitable for the operation of the lauter tun was designed. The biological model of mole cricket claw teeth of its digging foot was reconstructed, and the dynamic process of claw teeth wedging into soil was simulated. According to the simulation results, the claw tooth T4 has the highest similarity with the design objectives of raking knife. The key contour curve is extracted from the biological model of claw tooth T4, and the curve formula is fitted with the coordinates of several points of the curve, and the fitted curves are generated. The fitting curves are applied to the design of plow contour line of bionic raking knife and the main contour line of horizontal section of blade board. Finally, the design scheme was verified by simulation. The results show that, compared with the prototype, the maximum shear stress on the surface of the raking knife is reduced by 18.90%; the maximum shear stress on the inner wall of the lauter tun is reduced by 19.01%; and the maximum fluid velocity is reduced by 11.46%.
Publication Date
2-18-2023
First Page
65
Last Page
69
DOI
10.13652/j.issn.1003-5788.2020.12.014
Recommended Citation
ZHANG, Zhi-feng; ZHANG, Jun-xia; and ZHANG, Yan
(2023)
"Simulation and design of raking knives based on bionic design method,"
Food and Machinery: Vol. 36:
Iss.
12, Article 14.
DOI: 10.13652/j.issn.1003-5788.2020.12.014
Available at:
https://www.ifoodmm.cn/journal/vol36/iss12/14
References
[1] HENNEMANN M,GASTL M,BECKER T.Inhomogeneity in the lauter tun:A chromatographic view[J].European Food Research and Technology,2019,245(3):521-533.
[2] KHBECK Florian,BACK Werner,KROTTENTHALER Martin.Influence of lauter turbidity on wort composition,fermentation performance and beer quality:A review[J].Journal of the Institute of Brewing,2006,112(3):215-221.
[3] TIPPMANN J,SCHEUREN H,VOIGT J,et al.Procedural investigations of the lautering process[J].Chemical Engineering & Technology,2010,33(8):1 297-1 302.
[4] 马婷.高比例玉米淀粉辅料麦芽汁过滤堵塞的研究[D].无锡:江南大学,2015:3-6.
[5] 林兴华,刘海洋,徐孝雅,等.麦芽汁的压滤研究(1):糖化醪液和麦芽汁的物性参数研究[J].啤酒科技,2009,11(5):36-41.
[6] TANVIR Mustafy,IRNE Londono,ISABELLE Villemure.Experimental and finite element analyses of bone strains in the growing rat tibia induced by in vivo axial compression[J].Journal of the Mechanical Behavior of Biomedical Materials,2019,94:176-185.
[7] 檀润华,曹国忠,刘伟.创新设计概念与方法[J].机械设计,2019(9):1-6.
[8] 张志强.啤酒酿造技术[M].北京:轻工业出版社,2011:29-35.
[9] 张鹏涛.基于虚拟仪器的挖掘力测试系统的研制[D].天津:天津科技大学,2017:54-55.
[10] ZHANG Zhi-feng,ZHANG Yan,ZHANG Jun-xia,et al.Structure,mechanics and material properties of claw cuticle from mole cricket Gryllotalpaorientalis[J].PloS one,2019,14(9):e0222116.
[11] LEWIS B A.Manual for LS-DYNA soil material model 147(FHWA-HRT-04-095)[R].[S.l.]:Federal,Highway Administration,USA,2004.
[12] 丁峻宏,金先龙,郭毅之,等.土壤切削大变形的三维数值仿真[J].农业机械学报,2007(4):124-127.
[13] 赵淑红,谭贺文,张先民,等.新型锐角开沟器的设计及数值模拟[J].农机化研究,2017,39(11):44-48,58.
[14] 张智泓.田间土壤表面微形貌加工滚动触土部件与土壤相互作用及仿生几何结构[D].长春:吉林大学,2014:95-98.
[15] 郭志军,周德义,周志立.几种不同触土曲面耕作部件的力学性能仿真研究[J].机械工程学报,2010,46(15):71-75.
[16] 程菊,安家彦,董文勇,等.基于CFD技术的瓶装啤酒隧道式巴氏杀菌过程研究[J].食品与机械,2016,32(8):98-102.
[17] 赵洪亮.新型机械搅拌槽中多相流动的物理与数值模拟[D].沈阳:东北大学,2014:125-127.