Design and simulation research and verification of a new bowl-shaped jellyfish spiral cutting system

Authors

HAN Chuan-long, School of Mechanical Engineering and Automation, Dalian Polytechnic University, Dalian,Liaoning 116034 , China
LU Jin-shi, School of Mechanical Engineering and Automation, Dalian Polytechnic University, Dalian,Liaoning 116034 , China
TAO Xue-heng, School of Mechanical Engineering and Automation, Dalian Polytechnic University, Dalian,Liaoning 116034 , China
FENG Yi-ran, School of Mechanical Engineering and Automation, Dalian Polytechnic University, Dalian,Liaoning 116034 , China
ZHONG Sen-miao, School of Mechanical Engineering and Automation, Dalian Polytechnic University, Dalian,Liaoning 116034 , China
WANG Jing, School of Mechanical Engineering and Automation, Dalian Polytechnic University, Dalian,Liaoning 116034 , China
GUO Shuai, School of Mechanical Engineering and Automation, Dalian Polytechnic University, Dalian,Liaoning 116034 , China

Abstract

In order to overcome the shortcomings of manually cutting the bowl-shaped jellyfish, with inefficient and costly, high consumption of energy and serious pollution, a new bowl-shaped jellyfish spiral cutting system driven by a servo electric cylinder was designed. The corresponding three-dimensional solid model was constructed by using SolidWorks software and the dynamics simulation of the spiral cutting system was completed by HyperMesh/LS-DYNA software. Moreover, the process of cutting jellyfish with spiral cutter, the process of jellyfish skin failure and knife path formation were dynamically simulated. The change curve of shear force, and the characteristics of stress, strain and dynamic during the cutting process of jellyfish were obtained, and the validity of the simulation results was confirmed by experiments.

Publication Date

3-28-2020

First Page

105

Last Page

108

DOI

10.13652/j.issn.1003-5788.2020.03.020

Recommended Citation

Chuan-long, HAN; Jin-shi, LU; Xue-heng, TAO; Yi-ran, FENG; Sen-miao, ZHONG; Jing, WANG; and Shuai, GUO (2020) "Design and simulation research and verification of a new bowl-shaped jellyfish spiral cutting system," Food and Machinery: Vol. 36: Iss. 3, Article 20.
DOI: 10.13652/j.issn.1003-5788.2020.03.020
Available at: https://www.ifoodmm.cn/journal/vol36/iss3/20

References

[1] 赵玲,曹荣,刘淇,等.海蜇盐渍加工过程中质构与组织结构的变化[J].食品安全质量检测学报,2019,10(16):5 404-5 407.
[2] 雷晓静,陶学恒,冯怡然,等.碗状海蜇切丝装置:中国,201610977195.4[P].2017-03-22.
[3] 杜长强,许良元.腐竹切割刀具优化设计分析[J].食品与机械,2019,35(4):103-107.
[4] 叶鲁浩,张进生,王志,等.圆锯片—花岗石切割系统仿真研究[J].金刚石与磨料磨具工程,2015,35(3):35-39.
[5] 姚涛,段国林,高扬.基于LS-DYNA的圆锯片切割石材数值仿真研究[J].机械科学与技术,2013,32(6):884-887.
[6] 杨传华,方宪法,杨学军,等.基于PLC的蔬菜钵苗移栽机自动输送装置[J].农业机械学报,2013,44(S1):19-23,18.
[7] SILVESTRI C,RAY M H.Development of a finite element model of the knee-thigh-hip of a 50th percentile male including ligaments and muscles[J].International Journal of Crashworthiness,2009,14(2):215-229.
[8] MENG Yan-mei,WEI Jun-dong,WEI Jin,et al.An ANSYS/LS-DYNA simulation and experimental study of circular saw blade cutting system of mulberry cutting machine[J].Computers and Electronics in Agriculture,2019,157:38-48.
[9] 陶涛,魏新华.基于LS-DYNA的玉米芯冲击特性分析[J].农机化研究,2020,42(2):27-31,145.
[10] 赵海鸥.LS-DYNA动力分析指南[M].北京:兵器工业出版社,2003:47-49.
[11] HALLQUIST J O.LS-DYNA theory manual[M].California:Livermorc Software Technology Corporation,1998:16.8-16.12.
[12] 刘永平,许杰,廖福林,等.新型果园除草机器人结构设计与切割仿真分析[J].农机化研究,2020,42(4):28-32,39.
[13] 张锡佳,魏潇,刘政海,等.海蜇的加工技术与方法[J].齐鲁渔业,2007(3):46-47.