Study on the influence of meshing line of rotors on its performance of twin screw compressor

Authors

YU Jia-chuan, Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi, Jiangsu 214122 , China ；School of Mechanical Engineering, JiangnanUniversity, Wuxi, Jiangsu 214122 , China
HE Xue-ming, Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi, Jiangsu 214122 , China ；School of Mechanical Engineering, JiangnanUniversity, Wuxi, Jiangsu 214122 , China
LONG Ji, Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi, Jiangsu 214122 , China ；School of Mechanical Engineering, JiangnanUniversity, Wuxi, Jiangsu 214122 , China

Abstract

According to the distribution of the key points on the meshing line of the rotor profile of the twin screw compressor, the meshing line of the screw rotor profile was divided into five segments. The influence of the change of each segment on the performance parameters of the rotor profile was then discussed in detail. The resulted showed that the area utilization coefficient changes were associated with the area enclosed by the meshing line, which meant the sum of the area between the teeth of male rotor and female rotor changed to be larger. Only three segments of the sealing side of the meshing line had an effect on the area of the leakage triangle, and the changes of contact line length were complicated and closely related to the rotor profile.

Publication Date

3-28-2020

First Page

109

Last Page

114

DOI

10.13652/j.issn.1003-5788.2020.03.021

Recommended Citation

Jia-chuan, YU; Xue-ming, HE; and Ji, LONG (2020) "Study on the influence of meshing line of rotors on its performance of twin screw compressor," Food and Machinery: Vol. 36: Iss. 3, Article 21.
DOI: 10.13652/j.issn.1003-5788.2020.03.021
Available at: https://www.ifoodmm.cn/journal/vol36/iss3/21

References

[1] 郭耀君,谢晶,朱世新,等.超低温制冷装置的研究现状和进展[J].食品与机械,2015,31(1):238-243.
[2] 傅廷振,林雨晨.无油空压机技术为食品行业带来纯净气源[J].食品安全导刊,2016(7):72-73.
[3] WU Yu-ren,FONG Zhang-hua.Improved rotor profiling based on the arbitrary sealing line for twin-screw compressors[J].Mechanical and Machine Theory,2008,43(6):695-711.
[4] LITVIN Faydor L,FENG Pin-hao.Computerized design,generation,and simulation of meshing of rotors of screw compressor[J].Mechanism and Machine Theory,1997,32(2):137-160.
[5] GUIGGIANI M,LITVIN F L,FUENTES A,et al.Gear geometry and applied theory second ed:2004 cambridge university press cambridge[J].Mechanism and Machine Theory,2007,43(3):390.
[6] ZAYTSEV D,INFANTE FERREIRA C A.Profile generation method for twin screw compressor rotors based on the meshing line[J].International Journal of Refrigeration,2004,28(5):744-755.
[7] ZAYTSEV D,INFANTE FERREIRA C A.Screw compressor rotors profile generation method based on pre-defined meshing line[C]//Xian Jiaotong University.Proceedings of the 3rd International Compressor Technique Conference.Xian:Xian Jiaotong University,2001:129-139.
[8] 李汗强.圆弧包络线的传动性能分析及螺杆压缩机转子型线的优化设计[J].通用机械,2006(1):82-83,89.
[9] 何雪明,童洁,戴进,等.双螺杆转子型线的反向优化设计及应用[J].机械设计与研究,2015,31(4):151-157.
[10] HSU R H,WU Y R,CHENZ A,et al.A numerical method for reversely generating a pair of conjugated rotor profiles of twin-screw compressor from the measured profile data[J].Procedia CIRP,2017,63:483-487.
[11] 卢家伦,田雅芬,邢子文.基于离散数据的双螺杆压缩机共轭转子型线计算[J].压缩机技术,2019(3):1-5.