Abstract
In order to improve the production efficiency of slim cigarette, the stability of cigarette physical characteristics and further understand the variations between operating parameters and cigarette making condition, influence of needle roller overfeed, air fan pressure and stem separation air pressure on slim cigarette making machine operating conditions and cigarette physical characteristics were studied by the methods of 3 factors and 3 levels orthogonal design and mathematical statistics. The results are as follows: ① needle roller overfeed, air fan pressure and stem separation air pressure, the three cigarette making machine operating parameters, have different effects on slim cigarette making machine operating conditions and cigarette physical characteristics; ② Needle roller overfeed has significant difference with trimmer disc position, loose and rate and end density amount (P＜0.05); ③ With the needle roller overfeed increased, trimmer disc position decreased, end density amount increased, loose and rate decreased, and content of loss of tobacco from the ends decreased; ④ Air fan pressure has significant difference with trimmer disc position (P＜0.05); ⑤ With the negative air fan pressure increase, trimmer disc position decreased. In summary, with the needle roller overfeed increased, loose and rate of slim cigarette making machine will decreased and the quality of slim cigarettes will be improved.
Publication Date
3-28-2020
First Page
129
Last Page
132,142
DOI
10.13652/j.issn.1003-5788.2020.03.025
Recommended Citation
Kai-min, ZHOU; Hao-bo, ZHANG; Jin, HE; Yong, SI; and Ru-xin, SHU
(2020)
"Effects of the parameter variations of the cigarette-making machine on slim cigarette producing,"
Food and Machinery: Vol. 36:
Iss.
3, Article 25.
DOI: 10.13652/j.issn.1003-5788.2020.03.025
Available at:
https://www.ifoodmm.cn/journal/vol36/iss3/25
References
[1] 王金棒,洪广峰,高健,等.细支烟研究综述[J].中国烟草学报,2018,24(5):91-101.
[2] 国家烟草专卖局.关于启动细支卷烟升级创新重大专项的通知(国烟科〔2016〕154号)[Z].北京:国家烟草专卖局,2014.
[3] 赵宸楠.细支烟开发研究进展[J].轻工科技,2017,10:12-13.
[4] 袁海霞,郑茜,张胜化,等.适应细支卷烟加工特性的柔性风选系统优化设计[J].食品与机械,2019,35(9):122-126.
[5] 李洪涛,杨成.基于混料均匀设计的细支烟烟丝尺寸优化[J].济南大学学报:自然科学版,2018,32(2):146-149.
[6] 楚文娟,孟祥士,许旭,等.滤嘴参数对细支烟主要理化指标的影响[J].烟草科技,2019,52(8):60-66.
[7] 朱成文,郝喜良,沈晓晨,等.定长切丝技术在细支卷烟生产中的应用[J].烟草科技,2019,52(3):86-91.
[8] 朱尊权,郁源培,孙瑞申,等.卷烟工艺[M].北京:北京出版社,2000:260-276.
[9] 姚二民,邵宁,李晓.卷烟机运行参数对卷烟成品率影响研究[J].食品与机械,2016,32(12):206-208.
[10] 刘杰,张晋,高云,等.卷烟机VE供丝部的有关工艺参数对卷烟质量稳定度的影响[J].中国烟草科学,2009,30(4):56-58.
[11] 胡芳平,刘舞,郭志琨.ZJ17卷烟机工艺参数对烟支质量的影响研究[J].安徽农学通报,2018,24(14):121-122.
[12] 马逢时,周暐,刘传冰,等.六西格玛管理统计指南[M].北京:中国人民大学出版社,2007:268-331.
[13] 向虎,何孝强,王龙,等.基于烟丝特性和卷制原理的卷烟机最佳回丝量计算模型[J].食品与机械,2018,34(10):223-226.