Abstract
The structure and principle of the scraped-surface heat exchanger were systematically summarized, and the relative process applications, internal flow laws, shear rate, heat transfer mechanism, residence time distribution and power consumption were also reviewed. Moreover, the future development trend and research direction of the scraped-surface heat exchanger were prospected.
Publication Date
5-28-2020
First Page
99
Last Page
110
DOI
10.13652/j.issn.1003-5788.2020.05.019
Recommended Citation
Shi-cheng, LI
(2020)
"Research status and prospect of scraped-surface heat exchanger,"
Food and Machinery: Vol. 36:
Iss.
5, Article 19.
DOI: 10.13652/j.issn.1003-5788.2020.05.019
Available at:
https://www.ifoodmm.cn/journal/vol36/iss5/19
References
[1] NDOYE F T,HERNÁNDEZ-PARRA O D,BENKHELIFA H,et al.Influence of operating conditions on residence time distributions in a scraped surface heat exchanger during aerated sorbet production[J].Journal of Food Engineering,2018,222(4):126-138.
[2] HERNÁNDEZ-PARRA O D,NDOYE F T,BENKHELIFA H,et al.Effect of process parameters on ice crystals and air bubbles size distributions of sorbets in a scraped surface heat exchanger[J].International Journal of Refrigeration,2018,92(8):225-234.
[3] SARACENOL,BOCCARDI G,CELATA G P,et al.Development of two heat transfer correlations for a scraped surface heat exchanger in an ice-cream machine[J].Applied Thermal Engineering,2011,31(17/18):4 106-4 112.
[4] EISNER M D,WILDMOSER H,WINDHHAB E J.Air cell microstructuring in a high viscous ice cream matrix[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,2005,263(1/2/3):390-399.
[5] SULLO A,ARELLANO M,NORTON I T.Formulation engineering of water in cocoa-Butter emulsion[J].Journal of Food Engineering,2014,142(11):100-110.
[6] LEFÉBURE É,RONKART S,BROSTAUX Y,et al.Investigation of the influence of processing parameters on physicochemical properties of puff pastry margarines using surface response methodology[J].LWT-Food Science & Technology,2013,51(1):225-232.
[7] MISKANDAR M S,CHE MAN Y B,YUSOFF M S A,et al.Effect of scraped-surface tube cooler temperatures on the physical properties of palm oil margarine[J].Journal of the American Oil Chemists' Society,2002,79(9):931-936.
[8] RØNHOLT S,KIRKENSGAARD J J K,HØYER K F,et al.The effect of capacity,rotational speed and storage on crystallization and rheological properties of puff pastry butter[J].Journal of the American Oil Chemists Society,2014,91(1):29-38.
[9] D’ADDIO L,CAROTENUTO C,NATALE F D,et al.A new arrangement of blades in scraped surface heat exchangers for food pastes[J].Journal of Food Engineering,2012,108(1):143-149.
[10] WANG Yu-yang,RUSSELL A B,STANLEY R A.Mechanical damage to food particles during processing in a scraped surface heat exchanger[J].Food and Bioproducts Processing,2002,80(1):3-11.
[11] RAO C SRAO C S,HARTEL R W.Scraped surface heat exchangers[J].Critical Reviews in Food Science & Nutrition,2006,46(3):207-219.
[12] CHEN Jing-jing,WU Jia-jun,JI Xiao-yang,et al.Mechanism of waste-heat recovery from slurry by scraped-surface heat exchanger[J].Applied Energy,2017,207:146-155.
[13] BERI A,PICHOT R,NORTON I T.Physical and material properties of an emulsion-based lipstick produced via a continuous process[J].International Journal of Cosmetic Science,2014,36(2):148-158.
[14] REGAND A,GOFF H D.Effect of biopolymers on structure and ice recrystallization in dynamically frozen ice cream model systems[J].Journal of Dairy Science,2002,85(11):2 722-2 732.
[15] DEPYPERE F,VERBEKEN D,TORRES J D,et al.Rheological properties of dairy desserts prepared in an indirect UHT pilot plant[J].Journal of Food Engineering,2009,91(1):140-145.
[16] HRRD M.Scraped surface heat exchangers:A literature survey of flow patterns,mixing effects,residence time distribution,heat transfer and power requirements[J].Journal of Food Process Engineering,1986,9(1):1-62.
[17] ABICHANDANI H,SARMA S C,HELDMAN D R.Hydrodynamics and heat transfer in thin film scraped surface heat exchangers:A review[J].Journal of Food Process Engineering,1986,9(2):143-172.
[18] DEHKORDI K S,FAZILATI M A,HAJATZADEH A.Surface scraped heat exchanger for cooling Newtonian fluids and enhancing its heat transfer characteristics,a review and a numerical approach[J].Applied Thermal Engineering,2015,87(5):56-65.
[19] 徐文达,张超,周颖越.刮板式换热器的研究[J].食品与机械,1994,10(1):27-29.
[20] CRESPÍ-LLORENS D,VICENTE P,VIEDMA A.Flow pattern of non-Newtonian fluids in reciprocating scraped surface heat exchangers[J].Experimental Thermal and Fluid Science,2016,76(9):306-323.
[21] WALID B,PATRICK L,THIERRY B,et al.Cleanabilty study of a scraped surface heat exchanger[J].Food and Bioproducts Processing,2013,91(2):95-102.
[22] DUMONT E,FAYOLLE F,SOBOL ÍK V,et al.Wall shear rate in the taylor-couette-poiseuille flow at low axial reynolds number[J].International Journal of Heat and Mass Transfer,2002,45(3):679-689.
[23] DUMONT E,FAYOLLE F,LEGRAND J.Flow regimes and wall shear rates determination within a scraped surface heat exchanger[J].Journal of Food Engineering,2000,45(4):195-207.
[24] TROMMELEN A M,BEEK W J.The mechanism of power consumption in a Votator-type scraped-surface heat exchanger[J].Chemical Engineering Science,1971,26(12):1 977-1 986.
[25] TROMMELEN A M,BEEK W J.Flow phenomena in a scraped-surface heat exchanger(Votator-type)[J].Chemical Engineering Science,1971,26(11):1 933-1 942.
[26] DUMONT E,DELLA D,FAYOLLE F,et al.Influence of flow regimes on temperature heterogeneities within a scraped surface heat exchanger[J].Journal of Food Process Engineering,2000,23(3):207-220.
[27] DUMONT E,FAYOLLE F,LEGRAND J.Electrodiffusional wall shear rate analysis in scraped surface heat exchanger[J].AIChE Journal,2000,46(6):1 138-1 148.
[28] STRANZINGER M,BIEDER A,FEIGL K,et al.Effects of flow incidence and secondary mass flow rate on flow structuring contributions in scraped surface heat exchangers[J].Journal of Food Process Engineering,2002,25(3):159-187.
[29] WANG Wei,WALTON J H,MCCARTHY K L.Flow profiles of power law fluids in scraped surface heat exchanger geometry using MRI[J].Journal of Food Process Engineering,1999,22(1):11-27.
[30] WANG Wei,WALTON J H,MCCARTHY K L.Mixing in scraped surface heat exchanger geometry using MRI[J].Journal of Food Process Engineering,2000,23(6):403-418.
[31] MABIT J,LOISEL C,FAYOLLE F,et al.Determination of the volume fraction submitted to high shear in a scraped surface heat exchanger[J].Journal of Food Engineering,2003,57(2):165-172.
[32] DUFFY B R,WILSON S K,LEE M E M.A mathematical model of fluid flow in a scraped-surface heat exchanger[J].Journal of Engineering Mathematics,2007,57(4):381-405.
[33] YATAGHENE M,FRANCINE F,JACK L.Flow patterns analysis using experimental PIV technique inside scraped surface heat exchanger in continuous flow condition[J].Applied Thermal Engineering,2011,31(14/15):2 855-2 868.
[34] YATAGHENE M,PRUVOST J,FRANCINE F,et al.CFD analysis of the flow pattern and local shear rate in a scraped surface heat exchanger[J].Chemical Engineering & Processing:Process Intensification,2008,47(9/10):1 550-1 561.
[35] BENKHELIFA H,AMAMOU A H,ALVAREZ G,et al.Modelling fluid flow,heat transfer and crystallization in a scraped surface heat exchanger[J].Acta Horticulturae,2008(802):163-170.
[36] PAWAR S B,THORAT B N.CFD simulation of taylor-couette flow in scraped surface heat exchanger[J].Chemical Engineering Research & Design,2012,90(3):313-322.
[37] YATAGHENE M,JACK L.A 3D-CFD model thermal analysis within a scraped surface heat exchanger[J].Computers & Fluids,2013,71:380-399.
[38] IMRAN A,RANA M A,SIDDIQUI A M,et al.Flow of second grade fluid in a scraped surface heat exchanger[J].Journal of Food Process Engineering,2017,40:e12393.
[39] HERNÁNDEZ-PARRA O D,PLANA-FATTORI A,ALVAREZ G,et al.Modeling flow and heat transfer in a scraped surface heat exchanger during the production of sorbet[J].Journal of Food Engineering,2018,221(3):54-69.
[40] HUGGINS F E.Effect of scrapers on heating,cooling,and mixing[J].Industrial & Engineering Chemistry Research,1931,23(7):749-753.
[41] HOULTON H G.Heat transfer in the votator[J].Industrial & Engineering Chemistry,1944,36(6):522-528.
[42] BOLANOWSKI J P,LINEBERRYD D.Special heat transfer problems in the Food Industry[J].Industrial & Engineering Chemistry,1952,44(3):657-660.
[43] HARRIOT P.Heat transfer in scraped surface heat exchangers[J].Chemical Engineering Progress Symposium Series,1959,29:137-139.
[44] HARRIOTT P.A random eddy modification of the penetration theory[J].Chemical Engineering Science,1962,17(3):149-154.
[45] LEE J H,SINGH R K.Mathematical models of scraped-surface heat exchangers in relation to food sterilization[J].Chemical Engineering Communications,1990,87(1):21-51.
[46] SKELLAND A H P.Discussion of the paper “Correlation of scraped film heat transfer in the votator”[J].Chemical Engineering Science,1959,9(4):263-266.
[47] SKELLAND A H P,OLIVER D R,TOOKES.Heat transfer in a water-cooled scraped-surface heat exchanger[J].British Chemical Engineering,1962,7(5):345-353.
[48] CUEVAS R,CHERYAN M.Heat transfer in a vertical,liquid-full scraped surface heat exchanger:Application of the penetration theory and Wilson plots models[J].Journal of Food Process Engineering,1982,5(1):1-21.
[49] BOXTEL L B J V,GOETHART R L D F.Heat transfer to water and some highly viscous food systems in a water-cooled scraped surface heat exchanger[J].Journal of Food Process Engineering,1983,7(1):17-35.
[50] MIYASHITA H,YOSHIDA M,YAMANE T,et al.Heat transfer correlation in high Prandtl(high Schmidt)number fluid in Votator type scraped surface heat exchanger[J].Journal of Chemical Engineering of Japan,1997,30:545-549.
[51] SUN K H,PYLE D L,FITT A D,et al.Numerical study of 2D heat transfer in a scraped surface heat exchanger[J].Computers & Luids,2004,33(5/6):869-880.
[52] LAKHDAR M B,CERECERO R,ALVAREZ G,et al.Heat transfer with freezing in a scraped surface heat exchanger[J].Applied Thermal Engineering,2005,25(1):45-60.
[53] QIN Guan-feng,CHEN Xiao-dong,SHASHINI R,et al.Heat transfer and power consumption in a scraped-surface heat exchanger while freezing aqueous solutions[J].Separation and Purification Technology,2006,48(2):150-158.
[54] YATAGHENE M,FRANCINE F,JACK L.Experimental and numerical analysis of heat transfer including viscous dissipation in a scraped surface heat exchanger[J].Chemical Engineering and Processing,2009,48(10):1 447-1 458.
[55] SMITH A,WILSON S,DUFFY B,et al.Heat and fluid flow in a scraped-surface heat exchanger containing a fluid with temperature-dependent viscosity[J].Journal of Engineering Mathematics,2010,68(3/4):301-325.
[56] RAINIERI S,BOZZOLI F,CATTANI L,et al.Parameter estimation applied to the heat transfer characterisation of Scraped Surface Heat Exchangers for food applications[J].Journal of Food Engineering,2014,125(3):147-156.
[57] BAYAREH M,PORDANJANI A H,NADOOSHAN A A,et al.Numerical study of the effects of stator boundary conditions and blade geometry on the efficiency of a scraped surface heat exchanger[J].Applied Thermal Engineering,2017,113(2):1 426-1 436.
[58] D’ADDIO L,CAROTENUTO C,NATALE F D,et al.Heating and cooling of hazelnut paste in alternate blades scraped surface heat exchangers[J].Journal of Food Engineering,2013,115(2):182-189.
[59] MAINGONNAT J F,CORRIEUG.A new approach to modelling the thermal behavior of scraped surface heat exchanger[J].Engineering and Food,1984,1:79-87.
[60] GOEDE R D,JONG E J D.Heat transfer properties of a scraped-surface heat exchanger in the turbulent flow regime[J].Chemical Engineering Science,1993,48(8):1 393-1 404.
[61] QIN Guan-feng,CHEN Xiao-dong,RUSSELL A B.Heat transfer at the subcooled:Craped surface with/without phase change[J].AIChE Journal,2003,49(8):1 947-1 955.
[62] BOTT T R,AZOORY S,PORTER K E.Scraped-surface heat exchangers Part I:Hold-up and residence time studies[J].Chemical Engineering Research and Design,1968,46:33-36.
[63] MILTON J L,ZAHRADNIK J W.Residence time distribution of a votator pilot plant using a non-newtonian fluid[J].Agricultural Engineering,1973,16(6):1 186-1 189.
[64] RUSSELL A B,BURMESTER S S H,WINCH P J.Characterization of shear thinning flow within a scraped surface heat exchanger[J].Food and Bioproducts Processing,1997,75(3):191-197.
[65] TAEYMANS D,ROELANS E,LENGES J.Residence time distribution in a horizontal SSHE for UHT processing of liquids containing solids in Food Engineering and Process Applications[C]//Transport Phenomena.London:Elsevier Applied Science,1986:247-258.
[66] ALHAMDAN A,SASTRY S.Residence time distribution of food and simulated particles in a holding tube[J].Journal of Food Engineering,1997,34(3):271-292.
[67] LEE J H,SINGH R K.Residence time distribution characteristics of particle flow in a vertical scraped surface heat exchanger[J].Journal of Food Engineering,1993,18(4):413-424.
[68] LEE J H,SINGH R K.Scraped surface heat exchanger orientation influence on particle residence time distributions[J].Journal of Food Science,1991,56(5):1 446-1 447.
[69] LEE J H,SINGH R K.Normalized particle residence times as affected by process parameters in a vertical scraped surface heat exchanger[J].International Journal of Food Science & Technology,1998,33(4):429-434.
[70] CHEN C R,RAMASWAMY H S.A neuro-computing approach for modeling of residence time distribution(RTD)of carrot cubes in a vertical scraped surface heat exchanger(SSHE)[J].Food Research International,2000,33(7):549-556.
[71] ARELLANO M,BENKHELIFA H,ALVAREZ G,et al.Experimental study and modelling of the residence time distribution in a scraped surface heat exchanger during sorbet freezing[J].Journal of Food Engineering,2013,117(1):14-25.
[72] FRANCINE F,BELHAMRI R,FLICK D.Residence time distribution measurements and simulation of the flow pattern in a scraped surface heat exchanger during crystallisation of ice cream[J].Journal of Food Engineering,2013,116(2):390-397.
[73] ABICHANDANI H,SARMA S C.Residence time distribution in horizontal thin film scraped surface heat exchanger(SSHE)[J].Journal of Food Process Engineering,2010,10(2):71-80.
[74] TROMMELEN A M,BOEREMA S.Power consumption in a scraped surface heat exchanger[J].Transactions of the Institution of Chemical Engineers,1966,44:329-334.
[75] ALTIOKKA,MEHMET R.Power consumption for a scraped-surface heat exchanger with a “no-leak” reactor[J].Industrial & Engineering Chemistry Research,1992,31(10):2 385-2 388.
[76] ABICHANDANI H,SARMA S C.Power requirement during concentration of milk and cream in horizontal thin-film scraped surface heat exchanger[J].Indian Journal of Dairy Science,1989,42(2):155-158.