Abstract
According to the loads characteristics and working requirements of the rotor structure of the wheat peeler, the objective function, the design weight of the rotor, was solved under the constraints of input variables and state variables, here the structura
Publication Date
6-28-2020
First Page
107
Last Page
111
DOI
10.13652/j.issn.1003-5788.2020.06.019
Recommended Citation
Zhi-xin, ZHAO; Xu-dong, XUE; Jiang-hao, REN; Tuo-lei, LI; and Chang-ming, ZHANG
(2020)
"Lightweight design of wheat peeler rotor,"
Food and Machinery: Vol. 36:
Iss.
6, Article 19.
DOI: 10.13652/j.issn.1003-5788.2020.06.019
Available at:
https://www.ifoodmm.cn/journal/vol36/iss6/19
References
[1] 袁鼎山.FBPY型小麦剥皮机[J].粮食加工,2004(6):43.
[2] 王旭葆,曲波.基于SLM工艺的航空铝合金支架的轻量化设计[J].机械设计,2018,35(10):50-53.
[3] 陈立春,薛俊芳,张秀芬,等.颚式破碎机动鄂结构轻量化优化[J].煤炭工程,2018,50(8):164-167.
[4] 舒成松,张大斌,张云飞,等.烟秆拔秆破碎机机架轻量化设计与动静态特性分析[J].现代制造工程,2019(6):55-61,67.
[5] 袁鼎山.FBPY型小麦剥皮机的结构原理及性能[J].粮食与饲料工业,2005(4):15-16.
[6] 薛旭东,赵知辛,王琨.小麦脱皮机转子预弯工艺及优化设计[J].中国农机化学报,2020,41(3):104-108.
[7] 李进,石秀东,汪晨,等.基于Fluent的大型苏氨酸发酵罐内搅拌流场仿真分析[J].食品与机械,2019,35(1):120-123,176.
[8] 张雄,戴宁,朱海清,等.基于Fluent下超细制浆粉碎刀头的流场分析[J].食品与机械,2019,35(1):114-119.
[9] 王少峰,张媛,刘美莲,等.不同温度状态下啮合异向双螺杆挤出机的流道分布规律[J].食品与机械,2018,34(10):71-74.
[10] 卫原平,杨青,刘涛然,等.碳纤维复合材料控制臂的轻量化设计与验证[J].玻璃钢/复合材料,2019(9):74-78.
[11] 赵清宇,李利民,张杰,等.小麦谷蛋白溶胀指数与面团特性及面条品质相关性分析[J].食品与机械,2011,27(6):43-46.
[12] CONLAN-SMITH C,JAMES K A.A stress-based topology optimization method for heterogeneous structures[J].Structural and Multidisciplinary Optimization,2019,60(1):1-17.
[13] 丁乃红,寇霄腾,张卉,等.基于层次分析和响应面设计的烟丝膨胀工艺优化[J].食品与机械,2020,36(2):219-223.
[14] 陈龙飞,王敏,范柳萍,等.响应面法优化玛咖全粉直接压片法研究[J].食品与机械,2017,33(2):169-174.