Abstract
The complex relationship between the process parameters and the quality index of loosening and conditioning process was studied, and the network model was established by using Bayesian network analysis method. The results showed that: ① The network model of loosening and conditioning process could well reveal the influence relationship and influence weight of process parameters on the discharge moisture content and temperature. ② The influence degree of process parameters on the discharge moisture content was determined as from high to low, opening of automatic valve for air water mixing ＞ unit time material cumulative measurement ＞ water addition ratio ＞ opening of automatic valve for steam ＞ hot air temperature. But, the influence degree of process parameters on the discharge temperature was determined as from high to low, hot air temperature ＞ unit time material cumulative measurement ＞ opening of automatic valve for air water mixing ＞ opening of automatic valve for steam ＞ water addition ratio. ③ The prediction accuracy of network model of loosening and conditioning process on discharge moisture content and temperature were 64.34% and 65.72% respectively, which had a good application effect and practical value. It could be predicted that Bayesian network analysis method had a wide range of application prospects in guiding the actual production and improving the quality of cigarette processing.
Publication Date
2-18-2023
First Page
207
Last Page
210
DOI
10.13652/j.issn.1003-5788.2020.09.037
Recommended Citation
TANG, Jun; TANG, Li; WEN, Li-liang; HE, Bang-hua; LIN, Wen-qiang; ZENG, Zhong-da; MA, Ning; and ZHOU, Bing
(2023)
"Construction and prediction of Bayesian network model of relationship between process parameters and discharge quality in loosening and conditioning,"
Food and Machinery: Vol. 36:
Iss.
9, Article 37.
DOI: 10.13652/j.issn.1003-5788.2020.09.037
Available at:
https://www.ifoodmm.cn/journal/vol36/iss9/37
References
[1] 徐维华,罗登山,雷樟泉,等.卷烟工艺规范[M].北京:中国轻工业出版社,2016:12.
[2] 陈杰,徐永虎,吴昌军,等.松散回潮工序工艺参数对片烟加工物理性能的影响[J].烟草科技,2018,51(11):85-90.
[3] 邵惠芳,赵蓉蓉,范磊,等.松散回潮回风温度对烟叶化学成分与中性致香物质的影响[J].中国农业科技导报,2016,18(6):138-145.
[4] 高翔,黄传喜,陈杰.松散回潮模式对烟叶加工质量的研究[J].南方农机,2018,49(16):84.
[5] 唐军,周冰,唐丽,等.松散回潮工序加工强度对烟丝致香物质的影响[J].江西农业学报,2015,27(3):66-69,73.
[6] 邓国栋,姚光明,李晓,等.松散回潮工序加工强度对烤烟烟叶感官特性的影响[J].郑州轻工学院学报(自然科学版),2011,26(2):32-35.
[7] 李秀芳.烟片松散回潮关键工艺参数过程控制系统的优化设计[J].中国烟草学报,2015,21(3):34-41.
[8] 范勇,郑利锋,庞天航,等.烟叶松散回潮含水率控制方法的优化[J].轻工科技,2019,35(4):123-125.
[9] 容秀英,林明,冯志斌.烟叶松散回潮热风温度极值的控制方法研究[J].湘潭大学自然科学学报,2017,39(2):105-108.
[10] TANG Li-jun,FANG Ying-jie,YIN Jian-chun.The effects of exercise interventions on Parkinson’s disease:A Bayesian network meta-analysis[J].Journal of Clinical Neuroscience,2019,70(8):47-54.
[11] MAURO S,ANTONIO S,FABIO S.A survey on Bayesian network structure learning from data[J].Progress in Artificial Intelligence,2019,8(4):425-439.
[12] 范慧敏.基于贝叶斯网络的动态数据流分类研究[D].西安:西安理工大学,2019:1-4.
[13] 李艳美.基于贝叶斯网络的数据挖掘应用研究[D].西安:西安电子科技大学,2008:1-7.
[14] 何林海.基于贝叶斯网络的概率图模型变分近似推理研究[J].山东农业工程学院学报,2019,36(4):26-27.
[15] 周冰,唐军,文里梁,等.连续型贝叶斯网络在制丝工艺过程稳态优化中的应用[J].烟草科技,2019,52(12):93-99.