Design and test of the separator of kitchen waste residue liquid based on EDEM fluent simulation

Authors

WANG Hao-xuan, College of Mechanical and Electrical Engineering, Yunnan Agricultural University, Kunming, Yunnan 650201,China
GUO Lin, College of Mechanical and Electrical Engineering, Yunnan Agricultural University, Kunming, Yunnan 650201,China
WANG Yi-ming, College of Civil Engineering, Henan University of Engineering, Zhengzhou, Henan 451191, China
ZHANG Yong-hua, College of Mechanical and Electrical Engineering, Yunnan Agricultural University, Kunming, Yunnan 650201,China
MAO Xin-bing, College of Mechanical and Electrical Engineering, Yunnan Agricultural University, Kunming, Yunnan 650201,China
ZHANG Tian-hui, College of Mechanical and Electrical Engineering, Yunnan Agricultural University, Kunming, Yunnan 650201,China

Abstract

Aiming at the problems of large-scale food waste treatment production line, such as large capital investment, high cost of equipment operation and maintenance, and single operation form of small-scale food waste treatment equipment, based on SolidWorks, a kind of food waste treatment equipment, which integrates feeding, crushing, compression and dehydration, is designed to realize high integration, high automation, low energy consumption and low operation cost of food waste resource utilization Slag liquid separator. The particle model was established by EDEM software, and the particle motion parameters of kitchen waste were analyzed and optimized by RNG k—ε turbulence model in Fluent. The results show that when the screw speed of the separator is 150 r/min, the operation of the separator is stable and the speed is kept at 0.05~0.07 m/s. In the range of 4.75~4.90 s, the velocity of particles reaches the maximum value of 0.14 m/s, and the force reaches the maximum value of 1.49 N, which can achieve fast and effective solid-liquid separation, significantly reduce the retention of harmful substances, and obtain higher resource recovery.

Publication Date

1-28-2021

First Page

130

Last Page

136

DOI

10.13652/j.issn.1003-5788.2021.01.021

Recommended Citation

Hao-xuan, WANG; Lin, GUO; Yi-ming, WANG; Yong-hua, ZHANG; Xin-bing, MAO; and Tian-hui, ZHANG (2021) "Design and test of the separator of kitchen waste residue liquid based on EDEM fluent simulation," Food and Machinery: Vol. 37: Iss. 1, Article 21.
DOI: 10.13652/j.issn.1003-5788.2021.01.021
Available at: https://www.ifoodmm.cn/journal/vol37/iss1/21

References

[1] 甄洪锋, 林宋, 鲍娜娜, 等. 家用餐厨垃圾处理机振动搅拌装置的建模与仿真[J]. 机床与液压, 2019, 47(4): 33-36.
[2] 刘悦. 餐厨垃圾处理设备的现状与发展趋势[J]. 中国资源综合利用, 2020, 38(5): 108-110.
[3] 黄将诚, 吴明亮, 马建国. 食物垃圾处理器的设计与研究[J]. 机械设计与制造工程, 2018, 47(3): 112-116.
[4] 金荣通, 汪萌生, 陈健, 等. 新型厨余垃圾处理器的设计[J]. 江苏农机化, 2017(2): 23-26.
[5] 刘芳霞. 家庭垃圾处理器设计[J]. 科技与创新, 2017(11): 21-22.
[6] 李静, 孟祥龙. 600 kg餐厨垃圾处理器研制[J]. 湖北农机化, 2019(16): 124-125.
[7] 黄珊珊, 韦建吉. 餐厨垃圾无害化处理设备与应用[J]. 现代农业装备, 2019, 40(5): 60-63.
[8] 吴华杰. 环保固液分离装置的研发[D]. 上海: 上海应用技术大学, 2017: 13-17.
[9] 韩丹丹, 张东兴, 杨丽, 等. 基于EDEM-CFD耦合的内充气吹式排种器优化与试验[J]. 农业机械学报, 2017, 48(11): 43-51.
[10] 顿国强, 陈海涛, 冯夷宁, 等. 基于EDEM软件的肥料调配装置关键部件参数优化与试验[J]. 农业工程学报, 2016, 32(7): 36-42.
[11] 廖庆喜, 张朋玲, 廖宜涛, 等. 基于EDEM的离心式排种器排种性能数值模拟[J]. 农业机械学报, 2014, 45(2): 109-114.
[12] CHEN Hui, LIU Yi-lun, ZHAO Xian-qiong, et al. Numerical investigation on angle of repose and force network from granular pile in variable gravitational environments[J]. Power Technology, 2015, 283: 607-617.
[13] 余书豪, 谌永祥. 螺旋轴直径对螺旋输送机性能的影响[J]. 中国粉体技术, 2018, 24(2): 32-37.
[14] 孙学良, 付志强, 张蕾, 等. 基于Fluent的黄桃罐头杀菌过程数值模拟及其形状优化[J]. 食品与机械, 2019, 35(7): 128-133.
[15] 古劲, 黄志刚, 米国强, 等. 基于Fluent单螺杆榨油机主压榨段流场仿真研究[J]. 食品与机械, 2019, 35(4): 80-86.
[16] 赵爽, 褚禛, 李文昱, 等. 一种厨余垃圾的机械生化处理技术的工程应用[J]. 环境工程, 2018, 36(8): 143-147.
[17] 侯鹏程, 史杰, 张猛. 建筑垃圾减量化设计实践调研[J]. 城市住宅, 2020, 27(3): 234-235, 237.
[18] 鲁帅, 张红, 梁淑霞, 等. 厨余垃圾处理现状及建议[J]. 安徽农学通报, 2017, 23(16): 87-88.
[19] 曹亚新, 王宏丽, 禹作利. 填埋垃圾处置与资源化利用研究[J]. 环境与发展, 2020, 32(4): 66, 68.
[20] 郑威. 厨余垃圾处理现状及对策探讨[J]. 节能与环保, 2020(4): 32-33.