Abstract
In order to ensure that the designed cam meets the requirements of high precision and stable motion of the end position of the actuator under the high speed state of the aseptic filling machine. Based on the harmonic analysis method, the dynamic response of the design of the pre-formed cam mechanism end in different working sections is checked. Under the ADAMS environment, the dynamic simulation of the cam mechanism obtains the trajectory of the end gripper of the actuator and the kinematics and dynamic characteristic curve of the mechanism at the working speed. The results show that the clamping jaws at the end of the actuator meet the requirements of no obvious vibration response; the pre-formed cam-link combination mechanism requires that the cam and the roller keep good contact at the speed, and the angular acceleration curve of the swing arm is gentle, which provides a basis for the actual use of the cam mechanism.
Publication Date
4-28-2021
First Page
98
Last Page
102
DOI
10.13652/j.issn.1003-5788.2021.04.018
Recommended Citation
Xian-rong, HE; Liao, PAN; Li-xin, LU; Zi-dong, LIN; and Fu-man, LI
(2021)
"Motion reliability analysis of pre-formed cam-link assembly mechanism of aseptic filling machine,"
Food and Machinery: Vol. 37:
Iss.
4, Article 18.
DOI: 10.13652/j.issn.1003-5788.2021.04.018
Available at:
https://www.ifoodmm.cn/journal/vol37/iss4/18
References
[1] 程勇, 王石刚, 梁庆华. 高速无菌砖式包装容量调整系统动力学分析及机构设计[J]. 机械设计, 2008, 25(9): 51-53.
[2] 郭聪. 包装机械设计制造中计算机仿真技术的运用[J]. 无线互联科技, 2016(13): 145-146.
[3] 李世云, 孙文磊, 洪荣荣. 基于ADAMS的采棉机摘锭运动规律分析及轨迹仿真[J]. 农机化研究, 2016(9): 74-77.
[4] 褚超美, 颜庭源, 凌建群, 等. 基于废气重吸策略的柴油机IEGR排气副凸轮仿真设计[J]. 汽车工程, 2012, 34(12): 1 076-1 080.
[5] 张燚, 黄松和. 基于ADAMS的凸轮连杆系统中凸轮的CAD系统开发及机构仿真分析[J]. 包装工程, 2018, 39(9): 171-176.
[6] 席晓燕. 推料机构凸轮轮廓曲线设计仿真及误差分析[J]. 食品与机械, 2017, 33(2): 77-80, 134.
[7] 魏代善, 管殿柱, 唐国龙. 盘形凸轮参数化设计及运动仿真[J]. 现代制造工程, 2017(5): 110-114.
[8] 冷东, 黄松和, 朱鹏飞. 包装机凸轮连杆组合机构的动态特性分析[J]. 机械设计与制造, 2015(6): 188-189, 193.
[9] 肖卫兵. 剑杆织机共轭凸轮引纬机构动态响应[J]. 机械传动, 2008, 32(1): 75-77.
[10] 郭杰, 杨传民, 何思念, 等. 无菌砖包机预成型机构支撑杆动力学分析[J]. 包装工程, 2018, 39(1): 116-120.
[11] 刘海生, 彭岩. 基于Matlab的发动机配气凸轮机构的动力学建模与仿真[J]. 机械设计与制造, 2008(4): 88-89.
[12] 石永刚, 吴央芳. 凸轮机构设计与应用创新[M]. 北京: 机械工业出版社, 2007: 209-220.
[13] 唐琼. 基于ADAMS的凸轮机构分析与动态仿真[J]. 安徽理工大学学报(自然科学版), 2010, 30(4): 22-24, 30.