Abstract
In view of the problem that the current tobacco heating cylinder cannot meet the temperature and moisture control requirements of the tobacco under different process conditions, the existing tobacco heating cylinder was designed and improved. A cooling and humidity control system was added to the tobacco, heating cylinder to realize dual-mode adjustment and control of the temperature and moisture of different smoke sheets. According to the temperature and moisture control requirements of the tobacco， the improved tobacco heating cylinder can switch between forward and reverse flow control. Verification experiments showed that the temperature and moisture stability of the improved tobacco heating cylinder were increased by 51% and 36%, respectively. After the improvement, the equipment system operates stably, and the control is safe and reliable.
Publication Date
5-28-2021
First Page
131
Last Page
133
DOI
10.13652/j.issn.1003-5788.2021.05.024
Recommended Citation
Sheng, CUI; Ri-nan, LI; Jin-ling, KANG; Zhen, LIU; and Bo, HUANG
(2021)
"Improvement on tobacco temperature and moisture control method of tobacco heating cylinder,"
Food and Machinery: Vol. 37:
Iss.
5, Article 24.
DOI: 10.13652/j.issn.1003-5788.2021.05.024
Available at:
https://www.ifoodmm.cn/journal/vol37/iss5/24
References
[1] 国家烟草专卖局. 卷烟 第4部分: 感官技术要求: GB/T 5606.4—2005[S]. 北京: 中国标准出版社, 2005: 1-4.
[2] 国家烟草专卖局. 卷烟工艺规范[S]. 北京: 中国轻工业出版社, 2016: 56-57.
[3] 宋凯敏, 丁丁, 何晋, 等. 切丝宽度与烘丝方式对不同规格卷烟的影响[J]. 食品与机械, 2020, 36（12）: 178-182.
[4] 郭华诚, 吴艳艳, 张峻松, 等. 切丝宽度对细支烟卷制质量、主流烟气及感官质量影响[J]. 食品与机械, 2021, 37（2）: 194-198.
[5] 张翼. 烟片增温过程的模糊PID控制算法及应用[J]. 科技创新与应用, 2018（12）: 139-140.
[6] 曾强, 常明彬, 阙文豪, 等. 气流干燥温度对不同部位烟叶加工品质的影响[J]. 食品与机械, 2020, 36（4）: 219-220.
[7] 李春光, 王海滨, 焦群山, 等. 不同增温模式对卷烟加料效果的影响[J]. 安徽农业科学, 2012（30）: 14 976-14 977.
[8] 高翔, 黄传喜, 陈杰, 等. 松散回潮模式对烟叶加工质量的研究[J]. 南方农机, 2018, 16: 84-85.
[9] 陈杰, 徐永虎, 吴昌军, 等. 松散回潮工序工艺参数对片烟加工物理性能的影响[J]. 烟草科技, 2018, 51（11）: 85-90.