Abstract
In this article, the process of the PET aseptic filling technology of beverage was summarized, and research progress of the PET aseptic filling process and equipment was analyzed. The aim of this article was to provide relevant basis for the application and optimization of the PET aseptic filling technology in the beverage industrial production.
Publication Date
5-28-2021
First Page
215
Last Page
220
DOI
10.13652/j.issn.1003-5788.2021.05.038
Recommended Citation
Jin-ding, CHEN; Shu-qiao, YANG; and Yan-xiang, GAO
(2021)
"Research and development of PET aseptic filling technology and equipment of beverage,"
Food and Machinery: Vol. 37:
Iss.
5, Article 38.
DOI: 10.13652/j.issn.1003-5788.2021.05.038
Available at:
https://www.ifoodmm.cn/journal/vol37/iss5/38
References
[1] 呼春雪, 冯志华, 刘良先, 等. PET瓶吹塑成型研究进展[J]. 现代塑料加工应用, 2020, 32（1）: 61-63.
[2] 张健康, 冯志华, 陈岩松, 等. PET瓶吹塑成型再加热阶段的研究进展[J]. 现代塑料加工应用, 2020, 32（5）: 60-63.
[3] 刘良先, 冯志华, 呼春雪, 等. 基于正交试验的PET瓶拉伸吹塑优化设计[J]. 中国塑料, 2020, 34（6）: 73-79.
[4] GHOSHAL G. Recent development in beverage packaging material and its adaptation strategy[M]. GRUMEZESCU A M, HOLBAN A M. Trends in beverage packaging. Chandigarh, India: Bhatnagar University Institute of Chemical Engineering & Technology, 2019: 21-50.
[5] 西得乐. 西得乐PET无菌整线解决方案[J]. 酒·饮料技术装备, 2017（3）: 70-72.
[6] CHU Jian-wei, CAI Yan-peng, LI Chun-hui, et al. Dynamic flows of polyethylene terephthalate （PET） plastic in China[J]. Waste Management, 2021, 124: 273-282.
[7] 孙奇, 张国宏. 运动饮料PET瓶无菌灌装生产线工艺设计及其验证[J]. 饮料工业, 2007, 10（5）: 30-35.
[8] CHAVAN R S, ANSARI M I A, BHATT S. Packaging: Aseptic filling[M]. CABALLERO B, FINGLAS P M, TOLDR F. Encyclopedia of food and health. Oxford: Academic Press, 2016: 191-198.
[9] LIMBO S, PELLEGRINO L, D'INCECCO P, et al. Storage of pasteurized milk in clear PET bottles combined with light exposure on a retail display case: A possible strategy to define the shelf life and support a recyclable packaging[J]. Food Chemistry, 2020, 329: 87-92.
[10] 艺康公司. 艺康在PET无菌冷灌装线清洗消毒方面的差异化解决方案[J]. 食品安全导刊, 2015（19）: 57.
[11] 郑斌. 关于无菌灌装技术的推广应用[J]. 酒·饮料技术装备, 2019（1）: 76-78.
[12] 马晓武. 无菌灌装与包装工艺[J]. 现代制造技术与装备, 2017（5）: 112-113.
[13] JILDEH Z B, KIRCHNER P, OBERLNDER J, et al. Development of a package-sterilization process for aseptic filling machines: A numerical approach and validation for surface treatment with hydrogen peroxide[J]. Sensors and Actuators A: Physical, 2020, 303: 111691.
[14] 丛福滋. PET瓶无菌冷灌装技术发展研究[J]. 农业科技与装备, 2010（1）: 52-55.
[15] 克朗斯. 无菌灌装的创新与飞跃[J]. 食品安全导刊, 2014（18）: 44-46.
[16] LEMOS W, AMARAL D, REIS P, et al. Reuse of refillable PET packaging: Approaches to safety and quality in soft drink processing[J]. Food Control, 2019, 100: 329-341.
[17] 金根升. PET冷灌装酶解燕麦乳饮料的开发[D]. 厦门: 集美大学, 2017: 6-7.
[18] 李慧丽. 浅谈PET瓶饮料的产品质量控制[J]. 轻工科技, 2015（7）: 3-4.
[19] 楚莉沙. 汽化过氧化氢（HPV）发生器的设计与杀菌研究[D]. 无锡: 江南大学, 2017: 8-13.
[20] 楚莉沙, 黄莉莉, 汪良峰, 等. 响应面优化汽化过氧化氢杀灭PET瓶内表面枯草芽孢杆菌工艺[J]. 食品与生物技术学报, 2019, 38（2）: 8-14.
[21] BOTTANI E, LONGO F, NICOLETTI L, et al. Wearable and interactive mixed reality solutions for fault diagnosis and assistance in manufacturing systems: Implementation and testing in an aseptic bottling line[J]. Computers in Industry, 2021, 128: 103-109.
[22] KIRCHNER P, LI B, SPELTHAHN H, et al. Thin-film calorimetric H2O2 gas sensor for the validation of germicidal effectivity in aseptic filling processes[J]. Sensors and Actuators B: Chemical, 2011, 154（2）: 257-263.
[23] KHS-CORPOPLAST G. Method and device for sterilizing preforms: US9254343B2[P]. 2016-12-09.
[24] LIMITED S. PET bottle sterilization apparatus and sterilization method: US9861717B2[P]. 2018-01-09.
[25] Dai Nippon Printing Co Ltd. Method of sterilizing preform and method of sterilizing container made of resin: US9988170B2[P]. 2018-01-05.
[26] Dai Nippon Printing Co Ltd. Method and apparatus for sterilizing preform: US10137217B2[P]. 2018-11-27.
[27] Dai Nippon Printing Co Ltd. Blow-molding machine and method of sterlizing the same: US20180001541A1[P]. 2018-01-04.
[28] Participations Sidel. Method for sterilizing preforms and installation for producing sterile bodies from these preforms: US8092757B2[P]. 2012-01-10.
[29] Participations Sidel. Installation for producing sterile bottles by blow molding sterilized preforms: US7806680B2[P]. 2010-10-05.
[30] 张国宏. 塑料包装容器高能电子干法杀菌技术[J]. 酒·饮料技术装备, 2019（5）: 50-52.
[31] 张国宏, 陆健锋, 于丽坤, 等. 高能电子用于PET瓶杀菌的研究及其工业化实施[J]. 饮料工业, 2020, 23（5）: 52-61.
[32] 严杰能, 林晓吟, 孙乔润, 等. 包装饮用水瓶盖脉冲光杀菌工艺的条件优化[J]. 饮料工业, 2019, 22（3）: 37-41.
[33] 江苏新美星包装机械股份有限公司. 一种电子束杀菌装置: CN109179302A[P]. 2019-01-11.
[34] 江苏新美星包装机械股份有限公司. 一种电子束空瓶杀菌装置: CN109896088A[P]. 2019-06-18.
[35] 江苏新美星包装机械股份有限公司. 一种电子束瓶盖杀菌装置: CN208995123U[P]. 2019-60-18.
[36] 江苏新美星包装机械股份有限公司. 一种使用电子束杀菌的吹灌旋一体装置: CN205115020U[P]. 2016-03-30.
[37] 江苏新美星包装机械股份有限公司. 一种PET空瓶的脉冲强光灭菌装置: CN205740330U[P]. 2016-11-30.
[38] Gmbh KHS. Method of sterilizing bottles with electron radiation and a sterilizing arrangement therefor: US9302896B2[P]. 2016-04-05.
[39] Ag Krones. Method and apparatus for the sterilization of containers: US9155807B2[P]. 2015-10-13.
[40] Ag Krones. Apparatus for the sterilization of plastics material containers by means of medium-controlled electron beams: US8961871B2[P]. 2015-12-24.
[41] 中国轻工机械协会. 无菌吹灌旋一体机验收规范: TCLIMA002—2021[S]. 北京: 全国团体标准信息平台, 2021: 1-13.
[42] 张洪飞. 吹、灌、封（三合一）设备及其无菌灌装工艺探讨[J]. 机电信息, 2013（14）: 1-7.
[43] 聂兰兰. 无菌灌装设备专利技术综述[J]. 科技创新与应用, 2017（9）: 77.
[44] 中国机械工业联合会. 食品包装用PET瓶吹瓶成型模具: GB/T 38461—2020[S]. 北京: 中国标准出版社, 2020: 1-3.
[45] 克朗斯股份有限公司. 用于容器的反压灌装的方法以及反压灌装机的灌装系统: CN111170250A[P]. 2020-05-19.
[46] KHS科博普拉斯特有限责任公司. 用于以碳化灌装物灌装容器并接着封闭灌装后的容器的方法和装置: CN111491865A[P]. 2020-08-04.
[47] Gmbh KHS-Coepoplast. Method and device for filling containers with carbonised filling material and subsequently closing the filled containers: WO2019197337A1[P]. 2019-10-17.
[48] 西得乐股份公司. 用可灌注产品灌装多个制品的灌装单元的可旋转罐的歧管: CN105731337A[P]. 2015-10-29.
[49] 克朗斯股份有限公司. 用于将饮料灌充到瓶内的方法和灌装机: CN111071972A[P]. 2020-04-28.
[50] 克朗斯公司. 用于将填充产品灌装到容器中的填充构件和方法: CN110655025A[P]. 2020-01-07.
[51] KHS有限责任公司. 用于灌装系统或灌装机的多路灌装元件: CN104603046A[P]. 2015-05-06.
[52] KHS有限责任公司. 用于饮料灌装设备的灌装单元的磁流变促动器: CN111542488A[P]. 2020-08-14.
[53] Gmbh KHS. Magentorhological actuator for a filling unit of a beverage filling system: EP3645449A1[P]. 2020-05-06.
[54] 克朗斯股份有限公司. 成形灌装机中的防洒出装置: CN105383042A[P]. 2016-03-09.
[55] 江苏新美星包装机械股份有限公司. 一种用于防止无菌灌装机中废气反串的装置: CN204454523U[P]. 2015-07-08.
[56] 西得乐独资股份公司. 非接触式灌装设备及其控制方法: CN103183300A[P]. 2013-07-03.
[57] 大日本印刷株式会社. 无菌灌装装置及其净化方法: CN110520380A[P]. 2019-11-29.
[58] 大日本印刷株式会社. 无菌灌装机以及无菌灌装方法: CN110621609A[P]. 2019-12-27.
[59] 克朗斯股份公司. 无菌灌装方法和装置: CN102530812A[P]. 2012-07-04.
[60] Participations Sidel. Method for producing a marked container comprising a step for marking a preform: US10913197 B2[P]. 2021-02-09.
[61] Participations Sidel. Filling device for filling machine: US10370234B2[P]. 2019-08-06.