Abstract
Objective: In order to analyze the movement and mixing characteristics of food powder particles in the double-shaft paddle mixer to optimize the verification of the mixer structure. Methods: The EDEM software was used to simulate the proportional mixing of three different sizes of food powder particles, and then Bin Groups would build a mixing box to observe the mixing situation, and evaluate it by studying the number of particles between different types of food powder. Results: At t=5 s, there was still a certain gap in the number of particles in the squares corresponding to the three types of powdered food particles, but the difference was basically the same. The mixing degree of the three types of powdered food particles was already very high; The change trend of the contact between food particles over time was basically the same. As time increasing, the number of contacts between various powdered foods also increased. After t=8 s, the number of contacts between particles between various powdered foods basically reached a stable value. Conclusion: The discrete element method can effectively analyze the mixing of powdered food in the paddle mixer.
Publication Date
8-28-2021
First Page
115
Last Page
118,125
DOI
10.13652/j.issn.1003-5788.2021.08.019
Recommended Citation
Yu-jing, XU
(2021)
"Dynamic simulation analysis of double-shaft paddle type food mixer based on DEM,"
Food and Machinery: Vol. 37:
Iss.
8, Article 19.
DOI: 10.13652/j.issn.1003-5788.2021.08.019
Available at:
https://www.ifoodmm.cn/journal/vol37/iss8/19
References
[1] 盛玉龙, 武凯, 孙宇, 等. 双轴混合机桨叶结构改进及数值模拟研究[J]. 机械设计与制造, 2019（9）: 9-12, 16.
[2] 刘扬, 唐玉荣, 胡芸莎, 等. 双轴桨叶式混合机内颗粒运动规律模拟研究[J]. 粉体食品工业, 2017, 38（9）: 11-15.
[3] 兰海鹏, 刘扬, 贾富国, 等. 双轴桨叶式混合机内椭球颗粒混合特性模拟[J]. 农机化研究, 2017, 39（6）: 74-78.
[4] 彭飞, 方芳, 王红英, 等. 基于CFD-DEM的粉体食品调质器物料运动模拟与试验[J]. 农业机械学报, 2018, 49（12）: 355-363.
[5] 夏蕊. 卧式螺带粉体食品混合机数值模拟及优化[D]. 咸阳: 西北农林科技大学, 2014: 18-19.
[6] 其格吉日嘎拉, 王春光, 王文明. 小型卧式混合机混合均匀度的试验研究[J]. 农机化研究, 2013, 35（8）: 132-135.
[7] 夏蕊, 郭贵生. 基于CFD的卧式螺带混合机的混合过程分析[J]. 农机化研究, 2014, 36（7）: 31-34.
[8] 杨星, 于克强, 王德福. 基于EDEM的转轮式TMR混合机混合性能数值模拟[J]. 农机化研究, 2017, 39（3）: 218-223.
[9] 高瑞红. 基于EDEM的碎玻璃清洗机螺旋叶片高度优化分析[J]. 山西电子技术, 2020（5）: 9-10, 51.
[10] 潘青, 张清照, 李艺灵. 基于EDEM的碎屑流运动规律及冲击性能研究[J]. 工程地质学报, 2020, 28（5）: 1 057-1 065.
[11] HE Ya-kai, LI Cui-ling, ZHAO Xue-guan, et al. Simulation analysis of the fertilizer ejecting device of corn fertilizer applicator based on EDEM[J]. Journal of Physics Conference Series, 2020, 1 633（1）: 27-29.
[12] 问小江, 方飞飞, 刘应科, 等. 基于煤粉堆积角的EDEM颗粒接触参数标定[J]. 中国安全科学学报, 2020, 30（7）: 114-119.
[13] 刘兰强, 蔡英. 基于EDEM的高精度施肥装置设计与试验[J]. 农机化研究, 2021, 43（3）: 68-75.