Abstract
Objective: To reduce the rejection rate of ZJ17 cigarette machine, shorten the adjustment time and improve the production efficiency. Methods: The rubber roller phase alignment device was developed to accurately measure the position of the rubber line by the sensor, and the measurement signal was transmitted to the industrial computer in real time. The shaft encoder signal was used to judge the offset of the rubber line, and the servo motor was driven to automatically adjust the phase of the rubber roll, so as to realize the real-time control of the position of the rubber line. Results: The rubber roller phase alignment device was easy to install and easy to maintain. The debugging time of the equipment was significantly shortened, and the debugging smoke branches are reduced from more than 30 000 before the transformation to within 1 000. Conclusion: The application of rubber roller phase alignment device improves production efficiency, and the cost reduction and efficiency are significantly effective.
Publication Date
10-16-2022
First Page
124
Last Page
127
DOI
10.13652/j.spjx.1003.5788.2022.90251
Recommended Citation
Shi-ming, LIU; Jian, WANG; Ze-yu, ZHAO; Yu-hui, JING; and You-zhi, SHI
(2022)
"Research and application of glue device for ZJ17 cigarette machine,"
Food and Machinery: Vol. 38:
Iss.
9, Article 23.
DOI: 10.13652/j.spjx.1003.5788.2022.90251
Available at:
https://www.ifoodmm.cn/journal/vol38/iss9/23
References
[1] 董祥云.YJ17-YJ27卷接机组[M].北京:中国科学技术出版社,2001:1.DONG X Y.YJ17-YJ27 Cigarette making machine[M].Beijing:China Science and Technology Press,2001:1.
[2] 刘澜波,刘三星,李华明,等.ZJ17卷接机组接装纸胶位在线微调装置设计[J].烟草科技,2019,52(3):102-106.LIU L B,LIU S X,LI H M,et al.Device for on-line fine tuning of glue position on tipping paper in ZJ17 cigarette maker[J].Tobacco Science & Technology,2019,52(3):102-106.
[3] 张卫宾,简金领.YJ29接装机供胶装置控胶辊的改进[J].中国机械,2013(13):173-174.ZHANG W B,JIAN J L.Improvement of glue controlling roller in glue applying device in YJ29 plug assembler[J].Machine China,2013(13):173-174.
[4] 赵龙,李忱臻,余宇文.预打孔水松纸间隔涂胶位置偏移故障分析及对策[J].中国科技信息,2013(23):52-54.ZHAO L,LI C Z,YU Y W.Analysis and solution of the pre-perforation cork paper skip gap gumming position deviation fault[J].China Science and Technology information,2013(23):52-54.
[5] 刘长龙,李宛洪,张永波,等.YJ29接装机间隔涂胶水松纸涂胶相位漂移故障解决措施[J].科技传播,2012,4(16):123-124.LIU C L,LI W H,ZHANG Y B,et al.Solution of glue position misalignment on tipping paper in YJ29 plug assembler[J].Public Communication of Scinece & Technology,2012,4(16):123-124.
[6] 牛中奇,朱满座,卢智远.电磁场理论基础[M].北京:电子工业出版社,2001:210-215.NIU Z Q,ZHU M Z,LU Z Y.Theoretical basis of electromagnetic field[M].Beijing:Electronic Industry Press,2001:210-215.
[7] 邱哗,彭金辉,黄铭,等.微波谐振腔微扰技术快速检测烟丝含水率[J].烟草科技,2008(6):38-40.QIU Y,PENG J H,HUANG M,et al.Rapid determination of moisture content in cut tobacco by microwave resonant cavity perturbation technique[J].Tobacco Science & Technology,2008(6):38-40.
[8] 李玉忠.微波水分测量技术发展历史及微波水分计制造现状[J].分析仪器,2006(3):40-52.LI Y Z.History of microwave moisture measurement technology and present situation of microwave moisture meter manufacture[J].Analytical Instrumentation,2006(3):40-52.
[9] 李新光,李德法,彭峋,等.YJ15.YJ25—YJ35卷接机组安装调试手册[M].许昌:许昌烟草工业机械厂,1993:15-20.LI X G,LI D F,PENG X,et al.YJ15.YJ25—YJ35 cigarette making machine installation and commissioning manual[M].Xuchang:Xuchang Tobacco Industry Machinery Factory,1993:15-20.
[10] 刘世明,周福儒,王剑,等.ZJ17卷接机组接装纸输送系统的改进[J].食品与机械,2020,36(2):119-121,228.LIU S M,ZHOU F R,WANG J,et al.Improvement of tipping paper conveying system for ZJ17 cigarette machine[J].Food & Machinery,2020,36(2):119-121,228.