Three-dimensional flow field analysis of a progressively accelerating single screw with kneading blocks

Authors

TIAN Dong, College of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang, Liaoning 110142, China
GUO Shu-guo, College of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang, Liaoning 110142, ChinaFollow
WANG Li-yan, College of Mechanical and Power Engineering, Shenyang University of Chemical Technology, Shenyang, Liaoning 110142, China

Corresponding Author(s)

郭树国（1978—），男，沈阳化工大学副教授，博士。E-mail:guoshuguo@126.com

Abstract

Objective: In order to improve the mixing performance and work speed of a single screw extruder increase. Methods: A coaxial gradual acceleration single screw using planetary wheel assemblies and mixing elements was designed. Using ansys/cfx to conduct the three-dimensional flow field analysis of the flow channel, the macro pressure field, speed vector diagram, speed streaming diagram and axial speed changes, were finished, which was compared to the only traditional pillar. Results: As the speed of the pillar continues to increase, the time for the material to stay in the barrel becomes shorter, and the extrusion efficiency of the gradual acceleration screw can be improved by 20% to 25%, so that the energy consumption is greatly reduced, due to the presence of the kneading block, the material is repeatedly squeezed at the kneading block, so that the gradual acceleration of the single screw in the increase in production capacity at the same time the mixing performance can be guaranteed. Conclusion: The coaxial gradual acceleration of the single screw high-speed rotation of the kneading block can make the material mix more fully, and can shorten the residence time of the material in the screw, improve the output.

Publication Date

4-25-2023

First Page

81

Last Page

84,90

DOI

10.13652/j.spjx.1003.5788.2022.80346

Recommended Citation

Dong, TIAN; Shu-guo, GUO; and Li-yan, WANG (2023) "Three-dimensional flow field analysis of a progressively accelerating single screw with kneading blocks," Food and Machinery: Vol. 39: Iss. 1, Article 13.
DOI: 10.13652/j.spjx.1003.5788.2022.80346
Available at: https://www.ifoodmm.cn/journal/vol39/iss1/13

References

[1] 郭树国, 张召, 王丽艳. 基于ANSYS的豆粕双螺杆膨化机的三维流场分析[J]. 中国农机化学报, 2014, 35（6）: 213-216, 240.
[2] 刘睿. 螺杆挤出机优化设计的现状[J]. 塑料科技, 2016, 44（3）: 85-88.
[3] 黄志刚, 刘凯, 付晓宇, 等. 单螺杆挤出机固体输送段的优化设计[J]. 中国塑料, 2014, 28（11）: 104-107.
[4] 王华峰, 周才根. 多螺杆挤出机的研究与应用[J]. 工程塑料应用, 2011, 39（9）: 85-88.
[5] 陈怡, 刘廷华. 多螺杆挤出机的开发与应用进展[J]. 中国塑料, 2004（6）: 29-32.
[6] 郭树国, 于淼, 王丽艳, 等. 带有开槽中性捏合块和反向螺纹双螺杆挤出机的三维流场分析[J]. 沈阳化工大学学报, 2020, 34（4）: 358-362.
[7] 潘龙, 张玉霞, 金志明, 等. 单螺杆挤出机高速挤出技术研究进展[J]. 中国塑料, 2009, 23（8）: 1-6.
[8] 黄元昌. 单螺杆挤出机混炼效果[J]. 橡塑技术与装备, 2014, 40（6）: 37-39.
[9] 汤霖森, 郭树国, 王丽艳. 基于ANSYS的带行星轮同轴变速单螺杆挤出机三维流场分析[J]. 食品与机械, 2021, 37（5）: 107-110.