Determination of discrete element simulation parameters of rice milling machine

Authors

ZHANG Ning, School of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450001, China
CAO Xian-zhou, School of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450001, ChinaFollow
WANG Xin-yu, School of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450001, China
SUN Yan-ling, School of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450001, China

Corresponding Author(s)

曹宪周（1963—），男，河南工业大学教授，硕士。E-mail：xianzhoucao@163.com

Abstract

Objective: To solve the problem that the roller is inconvenient to operate and the concept of rolling friction coefficient and sliding friction coefficient is confused. Methods: EDEM software was used to simulate the white milling process. Taking MNAW18 rice mill as a reference and taking Feng Liangyou series brown rice as a sample, a set of method for measuring discrete element simulation parameters of rice mill was established by independently setting up an experimental bench and combining with simulation calibration. Results: Using the self-made collision coefficient experimental device and video motion processing software, the collision recovery coefficients between brown rice and brown rice, roller and screen were 0.34, 0.24 and 0.43 respectively. Based on the relationship between inclined angle and static friction coefficient, the static friction experiment is designed. The static friction coefficients between brown rice and brown rice, roller and screen were 0.467, 0.881 and 0.550 respectively. The rolling friction coefficient was calibrated through the combination of brown rice stacking angle experiment, brown rice inclined plane rolling experiment and discrete element simulation experiment. The rolling friction coefficients between brown rice and brown rice, roller and screen were 0.013, 0.101 and 0.159 respectively. Conclusion: Through the secondary simulation, the error between the simulation results and the measured results is within a reasonable range, which indicates that the parameter calibration data is reliable.

Publication Date

4-25-2023

First Page

95

Last Page

100

DOI

10.13652/j.spjx.1003.5788.2022.80338

Recommended Citation

Ning, ZHANG; Xian-zhou, CAO; Xin-yu, WANG; and Yan-ling, SUN (2023) "Determination of discrete element simulation parameters of rice milling machine," Food and Machinery: Vol. 39: Iss. 1, Article 16.
DOI: 10.13652/j.spjx.1003.5788.2022.80338
Available at: https://www.ifoodmm.cn/journal/vol39/iss1/16

References

[1] 庞晓霞. 砂辊碾米机碾白室内物料运动仿真[D]. 郑州: 河南工业大学, 2015: 26-36.
[2] 张双. 碾米机中物料流流体动力学分析[D]. 郑州: 河南工业大学, 2017: 23-40.
[3] 曾勇. 横式碾米机内米粒碾白机理及破碎特性[D]. 哈尔滨: 东北农业大学, 2019: 19-47.
[4] 李碧, 宋少云, 张永林, 等. 卧式铁辊碾米机碾白压力影响因素的仿真研究[J]. 武汉轻工大学学报, 2021, 40（2）: 24-28.
[5] 刘瑞, 李衍军, 刘忠军, 等. 包衣玉米种子离散元参数分析与标定[J]. 农业机械学报, 2021, 52（增刊）: 1-8, 18.
[6] 张胜伟, 张瑞雨, 陈天佑, 等. 绿豆种子离散元仿真参数标定与排种实验[J]. 农业机械学报, 2022, 53（3）: 71-79.
[7] 牛智有, 孔宪锐, 沈柏胜, 等. 颗粒饲料破损离散元仿真参数标定[J]. 农业机械学报, 2022, 53（7）: 132-140, 207.
[8] 张涛, 刘飞, 赵满全, 等. 玉米秸秆接触物理参数测定与离散元仿真标定[J]. 中国农业大学学报, 2018, 23（4）: 120-127.
[9] UCGUL M, FIELKE J M, SAUNDERS C. Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soil[J]. Biosystems Engineering, 2014, 121: 105-117.
[10] ASAF Z, RUBINSTEIN D, SHMULEVICH I. Determination of discrete element model parameters required for soil tillage[J]. Soil and Tillage Research, 2007, 92（1/2）: 227-242.
[11] 郑向阳, 张领科, 符少波. 发射药颗粒间摩擦系数测定及其对装填密度的影响[J]. 弹道学报, 2019, 31（1）: 85-91.
[12] 王云霞, 梁志杰, 张东兴, 等. 基于离散元的玉米种子颗粒模型种间接触参数标定[J]. 农业工程学报, 2016, 32（22）: 36-42.
[13] 鹿芳媛, 马旭, 谭穗妍, 等. 水稻芽种离散元主要接触参数仿真标定与实验[J]. 农业机械学报, 2018, 49（2）: 93-99.
[14] 王志鹏, 李永祥, 徐雪萌. 基于堆积实验的小米离散元参数标定[J]. 中国粮油学报, 2021, 36（2）: 115-120.