Effects of screw arrangement in four screw extruder impact on characteristics of polylactic acid flow field

Authors

SHANG Jia-wei, School of Artificial Intelligence, Beijing Technology and Business University, Beijing 100048, China; Plastic Beijing Municipal Key Laboratory of Health and Safety Quality Evalvation Technology, Beijing 100048, China
HUANG Zhi-gang, School of Artificial Intelligence, Beijing Technology and Business University, Beijing 100048, China; Plastic Beijing Municipal Key Laboratory of Health and Safety Quality Evalvation Technology, Beijing 100048, ChinaFollow
ZHANG Yi-ming, School of Artificial Intelligence, Beijing Technology and Business University, Beijing 100048, China; Plastic Beijing Municipal Key Laboratory of Health and Safety Quality Evalvation Technology, Beijing 100048, China
YANG Ya-nan, School of Artificial Intelligence, Beijing Technology and Business University, Beijing 100048, China; Plastic Beijing Municipal Key Laboratory of Health and Safety Quality Evalvation Technology, Beijing 100048, China
DAI Xiang-ji, School of Artificial Intelligence, Beijing Technology and Business University, Beijing 100048, China; Plastic Beijing Municipal Key Laboratory of Health and Safety Quality Evalvation Technology, Beijing 100048, China

Corresponding Author(s)

黄志刚（1966—），男，北京工商大学教授，博士。E-mail:huangzg@btbu.edu.cn

Abstract

Objective: The flow channel distribution of polylactic acid in four screw extruder with different screw arrangement was studied. Methods: The three-dimensional modeling software Solidworks was used to establish the screw model and the corresponding fluid region model under the arrangement of one-word screw, four-square screw and encircle screw. Numerical simulation was carried out by the simulation software Polyflow. Results: The screw arrangement of monotype and surround type had better pressure building ability and distribution mixing ability than the square arrangement, and the square arrangement had weaker transport ability of polylactic acid. Conclusion: The four-screw extruder with one-line screw arrangement has a good effect on the processing of PLA.

Publication Date

4-25-2023

First Page

72

Last Page

77

DOI

10.13652/j.spjx.1003.5788.2022.90258

Recommended Citation

Jia-wei, SHANG; Zhi-gang, HUANG; Yi-ming, ZHANG; Ya-nan, YANG; and Xiang-ji, DAI (2023) "Effects of screw arrangement in four screw extruder impact on characteristics of polylactic acid flow field," Food and Machinery: Vol. 39: Iss. 3, Article 13.
DOI: 10.13652/j.spjx.1003.5788.2022.90258
Available at: https://www.ifoodmm.cn/journal/vol39/iss3/13

References

[1] 单梦瑶, 杨操, 张世科, 等. 聚乳酸增强增韧的研究进展[J]. 高分子材料科学与工程, 2022, 38（3）: 183-190.
[2] CHARLIE M. Twin screw extruders as continuous mixers for thermal processing: A technical and historical perspective[J]. AAPS Pharm Sci Tech, 2016, 17（1）: 3-19.
[3] 李响, 王东阳, 朱向哲. 同向旋转三螺杆挤出机固体输送段输送特性研究[J]. 中国塑料, 2022, 36（1）: 160-165.
[4] 朱向哲, 佟莹, 高鹤. 四螺杆扰动下粘性流体混沌动力学特性研究[J]. 计算力学学报, 2019, 36（1）: 83-89.
[5] 耿孝正. 双螺杆挤出机及其应用[M]. 北京: 中国轻工业出版社, 2003: 167-168.
[6] 毕超. Polyflow软件基础及其在双螺杆挤出仿真过程中的应用[M]. 北京: 机械工业出版社, 2018: 10-16.
[7] 崔同伟, 马秀清. 螺杆构型对PA6/PE-LD共混体系性能的影响[J]. 中国塑料, 2015, 29（7）: 104-111.
[8] 商嘉玮, 张丽梅, 黄志刚, 等. 不同螺杆接触状态下异向双螺杆挤出机的流道分布规律[J]. 食品与机械, 2022, 38（5）: 61-64.
[9] 安琪, 黄志刚, 胡淑珍, 等. 适应性网格技术在异向双螺杆挤出机中的仿真[J]. 食品与机械, 2021, 37（4）: 91-97.
[10] 李梦林, 刘凯, 黄志刚, 等. 聚乳酸用单螺杆挤出机熔体输送段数值模拟研究[J]. 中国塑料, 2015, 29（11）: 102-107.
[11] 赵玉莲, 李鑫, 安琪, 等. 非等温条件下啮合同向双螺杆挤出过程数值模拟分析[J]. 食品与机械, 2019, 35（4）: 76-79.
[12] 黄凤春, 马秀清, 周炳斌, 等. 同向双螺杆拉伸元件的设计及混合性能的研究[J]. 中国塑料, 2011, 25（9）: 90-94.
[13] TOR-SWIATEK A, SUBERLYAK О, KRASINS'KYI В, et al. Distribution and geometric characteristics of pores and the strength properties of extrudates obtained by the twin-screw extrusion[J]. Materials Science, 2014, 49（6）: 812-818.
[14] 魏静, 张光辉. 双螺杆捏合机螺纹元件型线设计理论与方法[M]. 北京: 科学出版社, 2018: 129-190.
[15] 朱向哲, 袁惠群. 四螺杆挤出机中聚合物流动特性的计算机模拟[J]. 高分子材料科学与工程, 2008（9）: 14-18.
[16] 张宏建, 黄志刚, 李梦林, 等. 啮合同向双螺杆挤出机不同螺杆流场仿真分析[J]. 工程塑料应用, 2016, 44（9）: 70-74.
[17] 程建邦, 于兵, 陈峰峰, 等. 聚丙烯/无机纳米粒子在双螺杆挤出机内的分散混合效果数值模拟[J]. 工程塑料应用, 2021, 49（8）: 68-73, 80.
[18] 宗原, 戴干策. 单螺杆挤出机中停留时间分布的数值模拟[J]. 华东理工大学学报（自然科学版）, 2011, 37（6）: 673-678.