Abstract
Objectives: To meet the requirements of high cleaning rate and low loss rate. Methods: A small negative pressure winnowing machine for walnut shell and kernel mixtures was developed. Single factor test and response surface optimization method were used to analyze the working parameters of winnowing machine based on such two separation effect indicators as cleaning rate and loss rate. Results: For 1/2 shell kernel, 1/4 shell kernel, 1/8 shell kernel and 1/16 shell kernel materials, the optimal feeding rates were 4.0， 3.5， 3.0， 2.5 kg/min, the fan frequencies were 40， 35， 30， 30 Hz, the feeding inlet heights were 400， 400， 300， 300 mm, respectively. It was seen from the separation effect of different grades of walnut shell materials that 1/2 and 1/4 shell kernel materials had the best separation effect. Conclusion: Shell and kernel separation can be effectively realized by controlling the working parameters of winnowing machine. It is difficult to separate 1/8 and 1/16 shell kernel materials for the overlapping range of suspension speed of shell and kernel materials.
Publication Date
6-9-2023
First Page
83
Last Page
88
DOI
10.13652/j.spjx.1003.5788.2022.80710
Recommended Citation
Guo-yu, HU; Xu-dong, CHEN; Ya-lan, DONG; Guang, LIU; and Jian-ping, ZHOU
(2023)
"Optimization and experiments on working parameters of winnowing machine for walnut shell and kernel mixture,"
Food and Machinery: Vol. 39:
Iss.
5, Article 14.
DOI: 10.13652/j.spjx.1003.5788.2022.80710
Available at:
https://www.ifoodmm.cn/journal/vol39/iss5/14
References
[1] 王力荣. 我国桃产业现状与发展建议[J]. 中国果树, 2021（10）: 1-5.
WANG L R. Current situation and development suggestions of peach industry in China[J]. China Fruits, 2021（10）: 1-5.
[2] 邓金龙. 我国核桃生产现状及发展策略[J]. 林产工业, 2016, 43（10）: 56-58.
DENG J L. Current situation and development strategy of walnut industry in China[J]. China Forest Products Industry, 2016, 43（10）: 56-58.
[3] 刘明政, 李长河, 曹成茂, 等. 核桃分级破壳取仁及壳仁分离关键技术与装置研究进展[J]. 农业工程学报, 2020, 36（20）: 294-310.
LIU M Z, LI C H, CAO C M, et al. Research progress of key technology and device for size-grading shell-breaking and shell-kernel separation of walnut[J]. Transactions of the Chinese Society of Agricultural Engineering （Transactions of the CSAE）, 2020, 36（20）: 294-310.
[4] 马佳乐, 唐玉荣, 张永成, 等. 坚果壳仁分离的研究现状与分析[J]. 农机化研究, 2021, 43（2）: 263-268.
MA J L, TANG Y R, ZHANG Y C, et al. Research status and analysis of nut shell and kernel separation[J]. Journal of Agricultural Mechanization Research, 2021, 43（2）: 263-268.
[5] 刘佳, 沈晓贺, 杨莉玲, 等. 核桃破壳技术与装备研究进展[J]. 食品与机械, 2020, 36（9）: 223-227, 232.
LIU J, SHEN X H, YANG L L, et al. Research progress of walnut hulling technology and equipment[J]. Food & Machinery, 2020, 36（9）: 223-227, 232.
[6] 董远德, 张学军, 史建新. 核桃壳仁风选机的设计与试验研究[J]. 农业机械, 2012（24）: 156-158.
DONG Y D, ZHANG X J, SHI J X. Design and experimental study of walnut shell kernel wind separator[J]. Farm Machinery, 2012（24）: 156-158.
[7] 牛浩. 核桃壳仁分离装置设计及试验研究[D]. 阿拉尔: 塔里木大学, 2020: 1-10.
NIU H. Experimental study and design of separation device of walnut shell and kernel[D]. Aral: Tarim University, 2020: 1-10.
[8] 李忠新, 杨军, 杨莉玲, 等. 核桃破壳、壳仁分离生产线的研发[J]. 新疆农机化, 2010（4）: 16-17.
LI Z X, YANG J, YANG L L, et al. Research and development of walnut shell breaking and shell kernel separation production line[J]. Xinjiang Agricultural Mechanization, 2010（4）: 16-17.
[9] 朱占江, 康敏, 刘奎, 等. 核桃壳仁混合物料气流分离系统的试验研究[J]. 中国油脂, 2022, 47（3）: 137-142.
ZHU Z J, KANG M, LIU K, et al. Experimental study on airflow separation system of walnut shell and kernel mixed materials[J]. China Oils and Fats, 2022, 47（3）: 137-142.
[10] 陈旭东, 胡国玉, 赵腾飞, 等. 基于CFD-DEM耦合的核桃壳仁混合物负压风选仿真研究[J]. 山东农业大学学报（自然科学版）, 2021, 52（6）: 1 017-1 027.
CHEN X D, HU G Y, ZHAO T F, et al. Simulation study on negative pressure winnowing of walnut kernel mixture based on CFD-DEM coupling[J]. Journal of Shandong Agricultural University （Natural Science Edition）, 2021, 52（6）: 1 017-1 027.
[11] 张德高, 谢焕雄, 胡志超, 等. 花生色选机工作参数优化与试验[J]. 江苏农业科学, 2017, 45（18）: 218-222.
ZHANG D G, XIE H X, HU Z C, et al. Peanut color sorter working parameter optimization and test[J]. Jiangsu Agricultural Sciences, 2017, 45（18）: 218-222.