Abstract
Objective: This study aimed to improve the accuracy and feeding speed of the cap arranging unit. Methods: Using SolidWorks to build a virtual model and manufacture a real object, and the kinematic simulation of bottle cap and capping machine was carried out in Adams. Moreover, the results of different speeds were compared and analyzed. ANSYS Workbench was used to carry out engineering simulation of the device components and obtain their natural frequency and vibration mode, and the structural performance was optimized. Results: The cap arranging unit had the minimum damage to the caps at the optimum speed. The optimal speed of the designed new cap sorter mechanism was 15 r/min, and the average number of caps unscrambling was 402 pieces/min. Conclusion: The operation of the new cap sorter mechanism exceeds the scheduled workload stably, which meets the operation requirements of the cap sorter mechanism.
Publication Date
6-9-2023
First Page
89
Last Page
94,108
DOI
10.13652/j.spjx.1003.5788.2022.80863
Recommended Citation
Wen-jiao, GAO; Cheng-long, YIN; Zhong-zheng, PAN; De-fu, JIANG; and Wan, KE
(2023)
"Structural optimization design of swash plate capping machine cap sorter mechanism based on ANSYS Workbench,"
Food and Machinery: Vol. 39:
Iss.
5, Article 15.
DOI: 10.13652/j.spjx.1003.5788.2022.80863
Available at:
https://www.ifoodmm.cn/journal/vol39/iss5/15
References
[1] 徐天喜. 泵头盖高速理盖技术研究[D]. 无锡: 江南大学, 2011: 32-34.
XU T X. Research on technology of high-speed sorting for the dispensing pump caps[D]. Wuxi: Jiangnan University, 2011: 32-34.
[2] 郭志杰, 顾青青, 孙波. 旋盖机的主要工作机构分析[J]. 机电信息, 2014（32）: 24-27, 35.
GUO Z J, GU Q Q, SUN B. Analysis of the main working mechanism of the capping machine[J]. Mechanical and Electrical Information, 2014（32）: 24-27, 35.
[3] 严书华. 一种通用瓶盖理盖器与旋盖机构的设计[J]. 机电技术, 2007（4）: 30-32.
YAN S H. Design of a universal bottle cap sorter and cap screwing mechanism[J]. Mechanical & Electrical Technology, 2007（4）: 30-32.
[4] 曹瑞, 崔岩, 石卓栋. 一种新型吹气式理盖机的设计研究[J]. 包装与食品机械, 2011, 29（5）: 28-31.
CAO R, CUI Y, SHI Z D. Research & development for a new type spout applicator[J]. Packaging and Food Machinery, 2011, 29（5）: 28-31.
[5] 张有良, 孙建华, 戴明利, 等. 铝箔防盗盖理盖器的创新设计[J]. 包装与食品机械, 2016, 34（4）: 40-42.
ZHANG Y L, SUN J H, DAI M L, et al. Innovative design of tidying lid machine about antitheft aluminum foil lid[J]. Packaging and Food Machinery, 2016, 34（4）: 40-42.
[6] 雷晓静, 刘仁杰, 马丽敏. 一种塑料盖理盖系统的设计[J]. 辽东学院学报（自然科学版）, 2010, 17（2）: 129-132.
LEI X J, LIU R J, MA L M. Design of a plastic cap sorting system[J]. Journal of Eastern Liaodong University （Natural Science Edition）, 2010, 17（2）: 129-132.
[7] 陈勇, 曾能, 尤章金, 等. 浅谈如何降低白酒包装生产线灯检环节检出的渣酒率[J]. 酿酒, 2019, 46（6）: 89-91.
CHEN Y, ZENG N, YOU Z J, et al. A brief analysis of how to reduce the foreign particle percentage in light inspection during packaging[J]. Liquor Making, 2019, 46（6）: 89-91.
[8] 王钢. 高速理盖机正反盖结构设计原理分析[J]. 中国设备工程, 2019（7）: 172-174.
WANG G. Analysis on the design principle of front and back cover structure of high-speed cover unscrambling machine[J]. China Plant Engineering, 2019（7）: 172-174.
[9] 董淼鑫. 聚酯瓶自动旋盖机理盖机构的设计与研究[D]. 西安: 西安工业大学, 2012: 38-40.
DONG M X. Design and research of cap sorter mechanism of PET bottle automatic cap screwing machine[D]. Xi'an: Xi'an Technology University, 2012: 38-40.
[10] 赵宗课. 磁力回转式王冠盖理盖器的设计原理及要点[J]. 包装与食品机械, 2002（4）: 7-10, 15.
ZHAO Z K. The design principle and key point of magnetic force turning order equipment for crown cap[J]. Packaging and Food Machinery, 2002（4）: 7-10, 15.
[11] 徐天喜, 陆佳平. 一种泵头盖理盖装置设计[J]. 包装工程, 2010, 31（21）: 23-25, 36.
XU T X, LU J P. Design of sorting device for the dispensing pump[J]. Packaging Engineering, 2010, 31（21）: 23-25, 36.
[12] ROWSON J, YOXALL A, HART J H. Modelling capping of 28 mm beverage closures using finite element analysis[J]. Packaging Technology and Science: An International Journal, 2008, 21（5）: 287-296.