Abstract
[Objective] To deal the technical difficulties in further realizing the automation of de nucleating production of fresh peach slices. [Methods] A new type of fresh peach slicing and coining machine was designed. The cutting tool for slice kerning was simplified and analyzed by Mathematical analysis, and the motion characteristic equation and curve of the mechanism were obtained. The motion simulation analysis of the slicing and core-removing tool mechanism was carried out by using SolidWorks Motion software, and the motion characteristic curve of the mechanism was obtained.The correctness of the mathematical analysis was verified, and the rationality of the design of the cutting tool was also verified. [Results] The machine uses PLC control, including fresh peach conveyor chain feeding, fresh peach positioning, slicing tool movement, etc. Through the analysis of the field test results, the average cutting rate of fresh peach slicing and coiling machine reached 99.39%, the average coiling rate reached 99.15%, and the average breakage rate was lower than 0.12%. [Conclusion] The new type of fresh peach slicing and coiling machine can realize the automatic positioning, cutting and coiling of fresh peach, etc.
Publication Date
7-22-2024
First Page
83
Last Page
89
DOI
10.13652/j.spjx.1003.5788.2023.80748
Recommended Citation
Yifei, ZHANG
(2024)
"Design and analysis of a new type of fresh peach slitting machine,"
Food and Machinery: Vol. 40:
Iss.
6, Article 11.
DOI: 10.13652/j.spjx.1003.5788.2023.80748
Available at:
https://www.ifoodmm.cn/journal/vol40/iss6/11
References
[1] 于庆玲. 基于YOLOv3的果园桃子识别检测方法研究[D]. 乌鲁木齐: 新疆大学, 2021: 2-3.
YU Q L. Research on identification and detection method of orchard peach based on YOLOv3[D]. Urumqi: Xinjiang University, 2021: 2-3.
[2] 吕鲲, 朱朝阳, 吕鹏辉, 等. 桃子去核机合模机构的改进[J]. 机械设计与制造, 2017（10）: 179-182.
LU K, ZHU C Y, LU P H, et al. The clamping mechanism's improvement of the peach pitting machine[J]. Machinery Design & Manufacture, 2017（10）: 179-182.
[3] 曹劲草. 一种红枣去核机上料机构的设计与分析[J]. 包装与食品机械, 2021, 39（1）: 62-65.
CAO J C. Design and analysis of an automatic feeding mechanism of red jujube pitting machine[J]. Packaging and Food Machinery, 2021, 39（1）: 62-65.
[4] 刘奎, 杨莉玲, 朱占江, 等. 连续式杏果去核机设计[J]. 食品与机械, 2019, 35（2）: 113-116, 122.
LIU K, YANG L L, ZHU Z J, et al. Structure design of the continuous apricot pit removing machine[J]. Food & Machinery, 2019, 35（2）: 113-116, 122.
[5] 谢海军, 张连波, 朱明超, 等. “一器五行”龙眼去核装置设计与试验[J]. 食品与机械, 2023, 39（2）: 68-72.
XIE H J, ZHANG L B, ZHU M C, et al. Design and experiment of one cylinder driving five rows Longan core-removing mechanism[J]. Food & Machinery, 2023, 39（2）: 68-72.
[6] 王华, 张剑锋. 基于单片机控制的大枣去核机设计与试验[J]. 食品与机械, 2020, 36（2）: 115-118.
WANG H, ZHANG J F. Design and test of jujube enucleator controlled by single chip microcomputer[J]. Food & Machinery, 2020, 36（2）: 115-118.
[7] 卢利平. 一种拖拉机核心执行机构的可靠性分析[J]. 农机化研究, 2023, 46（2）: 265-268.
LU L P. Reliability analysis of a tractor core actuator[J]. Journal of Agricultural Mechanization Research, 2023, 46（2）: 265-268.
[8] 王东宝, 张静, 吴娟, 等. 含四杆机构单元的重载转运机器人构型综合[J]. 机械设计与制造, 2023（2）: 299-304.
WANG D B, ZHANG J, WU J, et al. Configuration synthesis of heavy-duty transfer robot with four-bar mechanism unit[J]. Machinery Design & Manufacture, 2023（2）: 299-304.
[9] 范景峰, 黄双成, 梅二召, 等. 基于十字轴万向节联轴器的运动与仿真分析[J]. 机械设计, 2021, 38（8）: 91-96.
FAN J F, HUANG S C, MEI E Z, et al. Motion and simulation analysis based on cross shaft universal joint coupling[J]. Journal of Machine Design, 2021, 38（8）: 91-96.
[10] 刘万鑫, 李志杰, 刘俊杰, 等. 一种轮式三节三姿态平台的结构设计与仿真分析[J]. 机械设计, 2021, 38（12）: 52-57.
LIU W X, LI Z J, LIU J J, et al. Structure design and simulation analysis on the wheeled three-section three-attitude platform[J]. Journal of Machine Design, 2021, 38（12）: 52-57.
[11] 何悦, 周鹏, 杨晓帅, 等. 一种仿生八足机器人的设计与越障仿真[J]. 制造业自动化, 2018, 40（9）: 150-153.
HE Y, ZHOU P, YANG X S, et al. The design and obstacle simulation of an eight-legged robot[J]. Manufacturing Automation, 2018, 40（9）: 150-153.
[12] 李楠. 基于PLC的黄桃罐头生产线自动分装系统研究[D]. 大连: 大连海洋大学, 2023: 18-20.
LI N. Research on the automatic packaging system of yellow peach canned production line based on PLC[D]. Dalian: Dalian Ocean University, 2023: 18-20.
[13] JIANG H. Research on electrical automation cont-academic[J]. Journal of Engineering and Technology Science, 2023, 6（3）: 4-5.
[14] LIU C, ZHANG X, GAI X H, et al. Design of pipeline flowmeter calibration system based on PLC control[J]. Journal of Physics: Conference Series, 2022, 2 181（1）: e012054.